I was on their site earlier looking at wheels, think they are around $370 including the Garmin mount
Are We Getting A New Cannondale Supersix?
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Whoa, when I remove it to clean last time, I'm sure mine doesn't have such tape.Beancouter wrote: ↑Tue Aug 11, 2020 11:56 amOne important thing to check is that the mount has been fitted with the 3m double sided pad (see 6 below). Mine wasn’t supplied with it. Install pictures sent to me by cannondale below...
Any special spec for the tape that I should pay attention? I have gorilla double sided mounting tape. It is a little thicker than 3m double sided pad so I'm not sure if it would make an okay substitute for thin 3m tape.
-
- Posts: 1099
- Joined: Fri Apr 20, 2012 9:04 pm
If it were me I would just contact your LBS or cannondale for one, at least you know it’s the right spec (and it’s free!).
I am on holiday at the moment but hopefully mine will be at home when I get back tomorrow. I will take some pics
Sent from my iPhone using Tapatalk
I am on holiday at the moment but hopefully mine will be at home when I get back tomorrow. I will take some pics
Sent from my iPhone using Tapatalk
Kalloy UNO stem absolutely normal (102g without ti-bolts)sohn wrote: ↑Thu Aug 13, 2020 1:20 pmAn update on my Supersix Evo Ultegra rim brake build. When I first got the bike, it weighed at 8.14kg with pedals and bottle cages.
Since then, I have replaced several parts to bring the weight down to around 7.2kg.
- Saddle: Bontrage Montropose Pro (169g). Weight saving: 107g
- Seatpost: Cannondale Hollowgram SL 27 KNOT Carbon (162g). Weight saving: 99g
- Crankset: Cannondale Si Hollowgram (8-arm) (602g). Weight saving: 131g
- Handlebars: Zipp SL-70 Aero 38cm (222g). Weight saving: 88g
- Wheels: Parcours Grumpeur (1350g). Weight saving: 300g
- QR skewers: Parcours (55g*2). Weight saving: 90g
- Tyres: Continental GP5000 25mm (232g*2). Weight saving: 36g
- Inner tubes: Continental Race Light (76g*2). Weight saving: 58g
A groupset upgrade may come in the future to drop a bit more weight. I know I can also save a bit more on the crankset by going with SISL2 but 165mm cranks are not available for that series. I wasl also considering using a Kalloy Uno stem but not sure if I trust a £20 stem to hold my £200 carbon handlebars!
- Cassette: Ultegra 11-30 (269g). Weight saving: 35g
S6 EVO3 - 6380g CAAD13 - 6626g TOPSTONE Al - 8195g
-
- Posts: 250
- Joined: Tue Oct 08, 2019 10:15 am
What is the weight difference to a zero offset post from the standard offset Knot post? Any ideas? Or negligible?
Cannondale SSEvo3 'Atticus' - 7.2kg
viewtopic.php?f=10&t=161634
Cannondale Systemsix ’Dante’ - 7.7kg
viewtopic.php?f=10&t=167144
viewtopic.php?f=10&t=161634
Cannondale Systemsix ’Dante’ - 7.7kg
viewtopic.php?f=10&t=167144
- Dan Gerous
- Posts: 2413
- Joined: Sun Aug 12, 2007 6:28 pm
Negligible. My zero setback post was 165.4gr, 168gr with the Di2 battery holder.Jackofallgrades wrote: ↑Sat Aug 15, 2020 12:52 pmWhat is the weight difference to a zero offset post from the standard offset Knot post? Any ideas? Or negligible?
-
- Posts: 1099
- Joined: Fri Apr 20, 2012 9:04 pm
I have swapped the clamp fittings from an old lightweight post and saved 25g!! Have bought another carbon base cradle which I am hoping has a slightly lower profileDan Gerous wrote:Negligible. My zero setback post was 165.4gr, 168gr with the Di2 battery holder.Jackofallgrades wrote: ↑Sat Aug 15, 2020 12:52 pmWhat is the weight difference to a zero offset post from the standard offset Knot post? Any ideas? Or negligible?
Sent from my iPhone using Tapatalk
-
- Posts: 250
- Joined: Tue Oct 08, 2019 10:15 am
Thanks guys
Cannondale SSEvo3 'Atticus' - 7.2kg
viewtopic.php?f=10&t=161634
Cannondale Systemsix ’Dante’ - 7.7kg
viewtopic.php?f=10&t=167144
viewtopic.php?f=10&t=161634
Cannondale Systemsix ’Dante’ - 7.7kg
viewtopic.php?f=10&t=167144
Who makes that cradle/yoke?Beancouter wrote: I have swapped the clamp fittings from an old lightweight post and saved 25g!! Have bought another carbon base cradle which I am hoping has a slightly lower profile
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Posts: 1099
- Joined: Fri Apr 20, 2012 9:04 pm
Cradle I have bought https://www.ebay.co.uk/itm/201074969276 . Preferably this will have a shallow curve to match the cut out on the seatpost .
Example yoke https://r2-bike.com/SCHMOLKE-Spare-Part ... O-Seatpost
https://www.ebay.co.uk/itm/292039170215
Total example (lots of options) from R2, less than 30g
Sent from my iPhone using Tapatalk
Example yoke https://r2-bike.com/SCHMOLKE-Spare-Part ... O-Seatpost
https://www.ebay.co.uk/itm/292039170215
Total example (lots of options) from R2, less than 30g
Sent from my iPhone using Tapatalk
Hi guys, i'm a old user, but i never post anything, but really like to read all the threads.
Can you help me with a doubt?
I bought last week a 2020 SSX Evo di2 womens bike for my wife, but she wont use the knot bar/stem combo, so i'll put her beloved regular round bars and stem.
So, my question is for those who bought the bicycle with the knot bar/stem combo (or anyone who knows about the parts): Does the k28000 part come with the top cap (the circuled green thing in the pictures below, becouse i really dont know how to call this in english lol)?? I mean, all the parts off the picures bellow come with the bike when is bought with the knot bar/stem?
Cheers guys
Can you help me with a doubt?
I bought last week a 2020 SSX Evo di2 womens bike for my wife, but she wont use the knot bar/stem combo, so i'll put her beloved regular round bars and stem.
So, my question is for those who bought the bicycle with the knot bar/stem combo (or anyone who knows about the parts): Does the k28000 part come with the top cap (the circuled green thing in the pictures below, becouse i really dont know how to call this in english lol)?? I mean, all the parts off the picures bellow come with the bike when is bought with the knot bar/stem?
Cheers guys
I have removed the plate (which was rotated - bad) very easily there was something sticky, but not a tape, especially 3M. So i have built something like this and will give it a shot.Beancouter wrote: ↑Tue Aug 11, 2020 11:56 amI have been told there isn’t a new one.. that said, I have a replacement coming to me under warranty. I will check to see if there is any difference.Wenne wrote:CANNONDALE SUPERSIX EVO INTERNAL SEAT BINDER, K26030
When does Cannondale make a new one ? mine is still making noise ...
One important thing to check is that the mount has been fitted with the 3m double sided pad (see 6 below). Mine wasn’t supplied with it. Install pictures sent to me by cannondale below...
Sent from my iPhone using Tapatalk
SW SL8 RTP 56cm @ 9270 / CLX II / CS OSPW / CEMA BB
S Epic 8 L @ XX T-Type / Berg Ratheberg 30 / Quarq / Fox Transfer SL 100mm / 3p
S Epic 8 L @ XX T-Type / Berg Ratheberg 30 / Quarq / Fox Transfer SL 100mm / 3p
this one has negative review on ebay, they say it doesn't fit supersix, so i have canceled the order.Beancouter wrote: ↑Sun Aug 16, 2020 8:32 amCradle I have bought https://www.ebay.co.uk/itm/201074969276 . Preferably this will have a shallow curve to match the cut out on the seatpost .
How about the one you have now? Where from it is, how does it look like on the bike and how much does it weight please?
SW SL8 RTP 56cm @ 9270 / CLX II / CS OSPW / CEMA BB
S Epic 8 L @ XX T-Type / Berg Ratheberg 30 / Quarq / Fox Transfer SL 100mm / 3p
S Epic 8 L @ XX T-Type / Berg Ratheberg 30 / Quarq / Fox Transfer SL 100mm / 3p
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com