Farsports F1 Integrated Handlebar/Stem
Moderator: robbosmans
I ordered it before they made it available from the website and offered different kits.
I ran it slammed and had the impression the stem was not sitting absolutely flat, now run with a 1mm spacer and its perfect.
—————————————
- Supersix evo2 HM 5707g
- 1995 Miguel Indurain Pinarello restauration project
- R3000si Junior bike restauration project.
I ran it slammed and had the impression the stem was not sitting absolutely flat, now run with a 1mm spacer and its perfect.
—————————————
- Supersix evo2 HM 5707g
- 1995 Miguel Indurain Pinarello restauration project
- R3000si Junior bike restauration project.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 13
- Joined: Mon May 27, 2019 6:40 pm
- Location: London
That's great thanks for responding. I ordered it without the kit as I couldn't find the dimensions and I don't think Windy understood what I meant. Based on other peoples experience my 380x100 should come to an effective stem of 110 but I'll measure when it arrives.
Sent from my ONEPLUS A6003 using Tapatalk
Sent from my ONEPLUS A6003 using Tapatalk
The reason why I'm thinking of changing from my current handlebar is because I want a higher angle stem. Yoleo is just heavier than my current setup without the the lower handlebar position that I'm looking for.Mcdeez wrote:Just buy a Yoeleo H10 handle barAryeh wrote:Is it still possible to buy the old lighter version somewhere?
You want -10 degree?Aryeh wrote:The reason why I'm thinking of changing from my current handlebar is because I want a higher angle stem. Yoleo is just heavier than my current setup without the the lower handlebar position that I'm looking for.Mcdeez wrote:Just buy a Yoeleo H10 handle barAryeh wrote:Is it still possible to buy the old lighter version somewhere?
-10° or -13°. I'm currently running -6°. I might just switch it it anyway and just live with the 50g penalty, but idk why they had to make it heavier.Mcdeez wrote:You want -10 degree?Aryeh wrote:The reason why I'm thinking of changing from my current handlebar is because I want a higher angle stem. Yoleo is just heavier than my current setup without the the lower handlebar position that I'm looking for.Mcdeez wrote:Just buy a Yoeleo H10 handle barAryeh wrote:Is it still possible to buy the old lighter version somewhere?
-
- Posts: 274
- Joined: Sat Nov 08, 2014 3:57 am
Your top cap looks like a jigger. Are you making drinks for the team during the ride? If so my hats off to you brother Thanks for the photos. I have a set of the bars sitting at my shop for a build. The bars look and feel great....sitting in my hand, not mounted, not ridden, etc. They may be the best thing on earth or they may be less than that. I purchased a set thinking the cost: benefit analysis worked out well in their favor. I had really hoped to have some miles in on them by this pont. But other parts of my build are holding things up.stalepigeon wrote: ↑Fri Apr 16, 2021 2:17 pmHey C36, did you order with the OD1 kit? I also have a ssevo2 and am wondering whether I'm going to need to use traditional spacers underneath. Thanks!C36 wrote:No, it’s 320 with shipping, I paid 325$ before the bar was publicly available on their website.VTR1000SP2 wrote:Was it ever less than $300?
Sent from my iPhone using Tapatalk
Will cut the steering tube once I finish playing with the stem angle. In the meantime I use reflective tape over the gold marking, good match with the pearl white the frame has.
Envoyé de mon iPhone en utilisant Tapatalk
Sent from my ONEPLUS A6003 using Tapatalk
I am looking to switch from stock bars on my SSE3.
I have a 90mm SAVE stem (comes out at traditional stem length of 100) + 80mm bar reach. So from centre fork to centre of drops = 180mm +-2mm
Assuming the Farspots reach is actually more like 65mm, does anyone have the 100mm bar, and can confirm full length from centre of fork to centre of drops? Is it 175mm or 165mm?
I have a 90mm SAVE stem (comes out at traditional stem length of 100) + 80mm bar reach. So from centre fork to centre of drops = 180mm +-2mm
Assuming the Farspots reach is actually more like 65mm, does anyone have the 100mm bar, and can confirm full length from centre of fork to centre of drops? Is it 175mm or 165mm?
I've been thinking bout getting the F1 bars, is the weight really near 390? Farsports sent me a photo showing the weight was 359g
I want instant gratification, don't really want to wait 45days
Anywho, I asked them if it was possible to get them in stealth, like ccache sells, and they said yes, but it'll be longer than the 45d lead time
I want instant gratification, don't really want to wait 45days
Anywho, I asked them if it was possible to get them in stealth, like ccache sells, and they said yes, but it'll be longer than the 45d lead time
What do you include in that mass? Unless they made them heavier, my 110x380 is below 340 with mount and screws.Maddie wrote:Mine is 370g without Garmin mount
—————————————
- Supersix evo2 HM 5707g
- 1995 Miguel Indurain Pinarello restauration project
- R3000si Junior bike restauration project.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com