Quarq Dzero BB30 into BB386

[teebs]

Hi All,

I currently have the above Quarq Dzero Aluminium unit that is fitted into a 2017 S Works Tarmac. I was hoping to move it across into my new Orbea Orca OMX that has a BB386. The online advice is conflicting and I've even checked the original box and it had the adapters for BB386 installation.

Can anyone confirm for me?

Many thanks.

[cerro]

Guessing you got a thick plastic spacer on the drive side, a small one next to the tensioner on the left side? If so just to take them away, change to 2+3mm spacers and a wavy washer. Made for both.

[teebs]

I will need to check but that sounds about right, thanks for your help.

[jmh]

Hi All,

I currently have the above Quarq Dzero Aluminium unit that is fitted into a 2017 S Works Tarmac. I was hoping to move it across into my new Orbea Orca OMX that has a BB386. The online advice is conflicting and I've even checked the original box and it had the adapters for BB386 installation.

Can anyone confirm for me?

Many thanks.

SRAM sells a kits for their Quarq BB30 kits to be used with BB386. It is some thin spacers and a wave washer.

https://www.amazon.com/SRAM-BB30-Spindl ... B074BBBCRQ

[teebs]

Thanks, I've checked the original box and the washer kit is in there!