2019 S-Works SL6 Disc - Project Sub 7 Pt. 2
Moderators: MrCurrieinahurry, maxim809, Moderator Team
Specced and built this up for a friend this week.
First time building an SL6 and installing 9170 (don't get me started on the brake line olives...).
Really happy with how it turned out, yet still waiting on a few parts. However, it's going over to Calpe this weekend so I had to build with a few heavier components for now.
Came in at 7,051g on the scales which is 21g lighter than the spreadsheet. I put this down to not measuring the brake fluid...
Spec:
With the incoming parts, we're looking to drop a further 136g which will put the bike at 6,915g.
Not bad for a full build (pedals, cages and Garmin mount), with "heavy" Enves, aero bars, fatty Conti tubeless tyres and a 30T cassette.
First time building an SL6 and installing 9170 (don't get me started on the brake line olives...).
Really happy with how it turned out, yet still waiting on a few parts. However, it's going over to Calpe this weekend so I had to build with a few heavier components for now.
Came in at 7,051g on the scales which is 21g lighter than the spreadsheet. I put this down to not measuring the brake fluid...
Spec:
With the incoming parts, we're looking to drop a further 136g which will put the bike at 6,915g.
Not bad for a full build (pedals, cages and Garmin mount), with "heavy" Enves, aero bars, fatty Conti tubeless tyres and a 30T cassette.
SL8 S-Works Project Black - 6.29kg
IG: RhinosWorkshop
IG: RhinosWorkshop
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Lighter, better looking, brake amazingly well.
SL8 S-Works Project Black - 6.29kg
IG: RhinosWorkshop
IG: RhinosWorkshop
Damn, those Enve's are porky for their profile. Unless they came off a previous build, why not Rovals? Would have saved an awful lot of weight.ryanw wrote: ↑Fri Apr 05, 2019 12:31 pmSpecced and built this up for a friend this week.
First time building an SL6 and installing 9170 (don't get me started on the brake line olives...).
Really happy with how it turned out, yet still waiting on a few parts. However, it's going over to Calpe this weekend so I had to build with a few heavier components for now.
Came in at 7,051g on the scales which is 21g lighter than the spreadsheet. I put this down to not measuring the brake fluid...
Spec:
With the incoming parts, we're looking to drop a further 136g which will put the bike at 6,915g.
Not bad for a full build (pedals, cages and Garmin mount), with "heavy" Enves, aero bars, fatty Conti tubeless tyres and a 30T cassette.
Anyway, a very good job. I doubt there's many disc bikes out there that could match how aero and yet "lightweight" this is.
This was a full custom build and the owner loves his Enve's, so went with 3.4s on CK45 Ceramics.
Agreed they're pretty heavy. We did discuss the AX Lightness Ultra Disc 28/45C TLR combo, which at 1,265g would have saved us 222g.
Always nice to know there's room for improvement
Agreed they're pretty heavy. We did discuss the AX Lightness Ultra Disc 28/45C TLR combo, which at 1,265g would have saved us 222g.
Always nice to know there's room for improvement
SL8 S-Works Project Black - 6.29kg
IG: RhinosWorkshop
IG: RhinosWorkshop
I love this. Clean and stealth. Bike looks fast as hell.
BH Ultralight
Litespeed Ghisallo
Scott Addict Singlespeed
_________________
Cannondale Evo HiMod
Felt AR FRD
Litespeed Ghisallo
Scott Addict Singlespeed
_________________
Cannondale Evo HiMod
Felt AR FRD
Had this in last week for a service and quick check to make sure all was well.
Made a few upgrades that I've forgot to update:
CeramicSpeed coated BB30 bearings
Extralite HyperStem Stealth 110mm / 6º - 74.9g exc. faceplate
Extralite CH-01 computer mount - 21.0g inc. faceplate (95.9g for stem & mount)
Berk Lupina 132mm padded - 103g
CarbonWorks bottle cages x2 - 8.7g each
Bike now weighs 6.76kg with everything ready to ride (cages, pedals, mount etc).
Made a few upgrades that I've forgot to update:
CeramicSpeed coated BB30 bearings
Extralite HyperStem Stealth 110mm / 6º - 74.9g exc. faceplate
Extralite CH-01 computer mount - 21.0g inc. faceplate (95.9g for stem & mount)
Berk Lupina 132mm padded - 103g
CarbonWorks bottle cages x2 - 8.7g each
Bike now weighs 6.76kg with everything ready to ride (cages, pedals, mount etc).
SL8 S-Works Project Black - 6.29kg
IG: RhinosWorkshop
IG: RhinosWorkshop
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com