Finishing Kit ideas
Moderator: robbosmans
-
- Posts: 4
- Joined: Wed Apr 24, 2013 4:00 pm
Hi there, newbie here.
So.....I'm awaiting the arrival of my shiny new Alchemy Xanthus (in tiny size so nice and WW), which I intend kitting out with DA 9000.
I'm looking for ideas on the finishing kit for this. I'm leaning towards a Thomson Masterpiece post as I've tried others and had problems, so keep coming back to Thomson.
WW thoughts on bars and stem and saddle (if there is a more WW version of the Terry butterfly carbon saddle 262mm x 155mm).
I've already ordered WW carbon bottle cages.
I'm 5'3" 135lbs.
Thanks,
ND
So.....I'm awaiting the arrival of my shiny new Alchemy Xanthus (in tiny size so nice and WW), which I intend kitting out with DA 9000.
I'm looking for ideas on the finishing kit for this. I'm leaning towards a Thomson Masterpiece post as I've tried others and had problems, so keep coming back to Thomson.
WW thoughts on bars and stem and saddle (if there is a more WW version of the Terry butterfly carbon saddle 262mm x 155mm).
I've already ordered WW carbon bottle cages.
I'm 5'3" 135lbs.
Thanks,
ND
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Given that your frame is from a U.S. company, I would do this...
Stem - Ritchey Superlogic Carbon C260
http://www.ritcheylogic.com/dyn_prodfamily.php?k=599987
Handlebars - Ritchey WCS Carbon Curve
http://www.ritcheylogic.com/dyn_prodfamily.php?k=394075
Seatpost - Ritchey Superlogic Carbon
http://www.ritcheylogic.com/dyn_prodfamily.php?k=397742
Saddle - Can't help you there
Stem - Ritchey Superlogic Carbon C260
http://www.ritcheylogic.com/dyn_prodfamily.php?k=599987
Handlebars - Ritchey WCS Carbon Curve
http://www.ritcheylogic.com/dyn_prodfamily.php?k=394075
Seatpost - Ritchey Superlogic Carbon
http://www.ritcheylogic.com/dyn_prodfamily.php?k=397742
Saddle - Can't help you there
Time VXRS Ulteam (7.16 kg)
viewtopic.php?f=10&t=120268
viewtopic.php?f=10&t=120268
I'd go for ENVE or Ritchey.
You can't be a real country unless you have a beer and an airline. It helps if you have some kind of a football team, or some nuclear weapons, but at the very least you need a beer.
-- Frank Zappa
-- Frank Zappa
- shabbasuraj
- Shop Owner
- Posts: 816
- Joined: Fri Jun 24, 2005 7:57 pm
- Location: shabbaland
Sometimes I want extra stupid bling and will go with a silver Thomson stem and a seat post that is the same colour and finish as my frame.
Mass Weenie
-
- Posts: 4
- Joined: Wed Apr 24, 2013 4:00 pm
Thanks for all the ideas. Will have to check them out.
Had seen the Williams finishing kit, that looks nice and WW, and significantly cheaper than a lot of other stuff. Not seeing much that confirms if weights are correct though!
I'm having a hard time working out the extras on this bike as I'm putting plenty in the frame seems rude not to finish it off right, but then the cost is getting up towards that of a small car! Thankfully bike riding is my only costly vice!
Had seen the Williams finishing kit, that looks nice and WW, and significantly cheaper than a lot of other stuff. Not seeing much that confirms if weights are correct though!
I'm having a hard time working out the extras on this bike as I'm putting plenty in the frame seems rude not to finish it off right, but then the cost is getting up towards that of a small car! Thankfully bike riding is my only costly vice!
-
- Posts: 235
- Joined: Tue Feb 05, 2013 8:29 pm
My main thought is that you really do have to focus on silver/black to tie in with that purdy DA9K you got going on. I think a Thomson Masterpiece seatpost will be great, probably in silver to stand out from the frame. Then do the THomson bars for the weight and to match the cockpit as much as possible.
Of course, you can go full ENVE across the board if you feel like having no money left. I highly advocate that since it's not my wallet.
Of course, you can go full ENVE across the board if you feel like having no money left. I highly advocate that since it's not my wallet.
- btompkins0112
- Posts: 2635
- Joined: Fri Feb 11, 2011 3:04 am
- Location: Mississippi
ENVE all around.....or you could go New Ultimate to save some $$
Mosaic RS-1
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478
Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478
Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376
- mellowJohnny
- Posts: 492
- Joined: Thu Aug 16, 2012 12:56 am
- Location: YYZ
+1 for the ENVE kit...drop dead gorgeous
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com