Tubular Repair
Moderator: robbosmans
Forum rules
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
Hi,
It might be caused by the rim cement "working" (as in trying to adhere but having to let go at each revolution) but that would not make that kind of sound IME.
However, a Veloflex Carbon or any Veloflex tyre for that matter should not present a bulge around the valve area.
Maybe the tyre wasn't properly put on as in not pulled sideways enough as it was put on the rim?
Just guessing but that's what I suspect.
Maybe wiser minds than mine will come to rescue.....
Ciao,
It might be caused by the rim cement "working" (as in trying to adhere but having to let go at each revolution) but that would not make that kind of sound IME.
However, a Veloflex Carbon or any Veloflex tyre for that matter should not present a bulge around the valve area.
Maybe the tyre wasn't properly put on as in not pulled sideways enough as it was put on the rim?
Just guessing but that's what I suspect.
Maybe wiser minds than mine will come to rescue.....
Ciao,
Being a snob is an expensive hobby.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
EdEPS wrote:I spent some time on an as good new Vittoria Corsa Evo SC which I got from a colleague. He tried to fix a small puncture with liquid latex but did not succced and he wanted to throw the tubular away.
After reading this topic and some other tubular repair topics on internet I openend the tubular for about 10cm of the valvehole, replaced the inner tube with a new latex inner tube (Vredestein), sewed it up again. Checked it and at last I glued the basetape back into place and put the tubular on a spare rim.
I inflated it up to 10 bar and it is holding with no bumps etc.
I only repaired a flat tubular once before so I do not have a lot of experience. But take your time, work carefully and do not hurry and you will succeed. Most member of the cycling club call me crazy for using tubulars. I agree that it takes more time compared to clinchers but it is no rocket science and I simply like the ride
By the way, I use Bison Kit as glue for the basetap which is, as far as I know, the same as Barge Cement.
http://www.bison.net/en/
If you have question about replacing an inner tube please let me know. Next time I will take pictures.
fdegrove wrote:Hi,
I'm sure I have described the procedure a few times already, just don't seem to find it somehow.
Anyhow, here's the link mentioned by jekyll man:
http://sheldonbrown.com/brandt/tubular-repair.html
Scroll down to "Tube Replacement".
Ciao,
I did replace the inner tube of a tire,sorry but no pictures.
thanks to every one,if possible soon i will make some pictures of how to proced.
cycling,a great individual sport,were you can't reach anything,whithout group effort.
i was about to send some tubs for repair to http://www.tubular-repairs.com/
sadly there is a message that Peter Burgin died on the 17th of June
for anyone wishing to make a contribution, his chosen charity is the British Heart Foundation http://www.bhf.org.uk/get-involved/donate.aspx
sadly there is a message that Peter Burgin died on the 17th of June
for anyone wishing to make a contribution, his chosen charity is the British Heart Foundation http://www.bhf.org.uk/get-involved/donate.aspx
I just took a tub off it's rim after more than 4500 km's of work ...
I'm wondering (it's been probably discussed already somewhere in here, but I can't find it), anybody used the tubular latex tube in a clincher ?
Thanks for the info,
Louis
I'm wondering (it's been probably discussed already somewhere in here, but I can't find it), anybody used the tubular latex tube in a clincher ?
Thanks for the info,
Louis
Hi,
No problem whatsoever. Recycle.
Ciao,
I'm wondering (it's been probably discussed already somewhere in here, but I can't find it), anybody used the tubular latex tube in a clincher ?
No problem whatsoever. Recycle.
Ciao,
Being a snob is an expensive hobby.
-
- Posts: 4
- Joined: Thu Jul 18, 2013 5:05 am
I am confusing to compare the TireAlert use latex tubes and not able to make a decision about it. How is it possible to check it?
Click here
Click here
Last edited by PerezTurner on Mon Oct 21, 2013 10:53 am, edited 1 time in total.
I think what you're asking is whether Ron at TireAlert will use latex tubes or not. The answer is: yes. If you provide him the tubes, he will use them. He still will not take responsibility (rightly) for the size. One of the guys on this Board just got tubulars back from Ron and he used latex Vittoria clincher tubes. No problems.
Hi,
AFAIK Ron uses butyl inner tubes per definition. If you want him to use the inner tube of your choice you simply send it along with the tubbie to repair and he'll then use that.
No idea if he'd charge extra bucks or whatever but it can be done.
Ciao and greetings to Geoff,
AFAIK Ron uses butyl inner tubes per definition. If you want him to use the inner tube of your choice you simply send it along with the tubbie to repair and he'll then use that.
No idea if he'd charge extra bucks or whatever but it can be done.
Ciao and greetings to Geoff,
Being a snob is an expensive hobby.
fdegrove wrote:Hi,I'm wondering (it's been probably discussed already somewhere in here, but I can't find it), anybody used the tubular latex tube in a clincher ?
No problem whatsoever. Recycle.
Ciao,
The Vittoria latex tubular inner tube is 42 g, opposed to a Vittoria clincher latex tube at 70 g .
Feels waaaayyy thinner too. I'll have to be careful that the rim bed and inner side of the tire are impeccable with this tube...
Louis
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com