Aero´s 29er WW
Moderators: MrCurrieinahurry, maxim809, Moderator Team
Hi everyone!
After a long 10 years without pedaling, I've come back this year to mtb´s. Started with a Scott aspect, but some thief stole it from my garage. Therefore, i started building a 29er on my own, as it follows:
- frame: cs-041 from xmcarbonspeed
- fork: Rock shox Reba 2015 Qr9mm
- wheelset: bor xmc 333 29er novatec lightest hubs spam spokes
- stem: ritchey wcs 260 -25º 100mm
- handlebar: kcnc sc bone 710mm
- crankset: race face next carbon cranks 2x
- cassete: 10sp xtr
- rdr: xtr
- fdr: xt
-chain: kmc (not the nitrite one)
-shifters: xt
-brakes: xtr
-rotors: xt ice tech 180mm/160mm
-seatpost: kcnc ti pro light 27,2
-saddle: Saevid carbon
-bottle holders: xmcarbon
-tires: Schwalbe thunderburt tl 2.1
-pedals: crank brothers eggbeater 2
final weight is 9,2kg, i was expecting less than this, but im working on it, I've bought Ti spindles for the pedals, carbon bar and a stem from lyti bikes, and a carbon seat post from hylix (only discovered lyti today). I have a pair of lightweight Quark rotors (+/-80gr each) witch i will change.
in my wishlist is a dt swiss odl opm race fork.
im looking to achieve the low 8kg setup. I use to ride 2-3 times a week 30-50km, off road with hard climbs, and sometimes i run marathons. My goal is to get ready to a 3 days 300km marathon in azores islands in April.
pics bellow:
http://s2.postimg.org/bgzs9a3m0/image.jpg
http://s23.postimg.org/drvii7mq2/image.jpg
http://s23.postimg.org/wlhbf7ky2/image.jpg
http://s23.postimg.org/ued2rafnu/image.jpg
http://s23.postimg.org/r2erxznwq/image.jpg
http://s23.postimg.org/ey43ur0ei/image.jpg
http://s23.postimg.org/jl5kirydm/image.jpg
http://s2.postimg.org/g0c0uslhk/image.jpg
After a long 10 years without pedaling, I've come back this year to mtb´s. Started with a Scott aspect, but some thief stole it from my garage. Therefore, i started building a 29er on my own, as it follows:
- frame: cs-041 from xmcarbonspeed
- fork: Rock shox Reba 2015 Qr9mm
- wheelset: bor xmc 333 29er novatec lightest hubs spam spokes
- stem: ritchey wcs 260 -25º 100mm
- handlebar: kcnc sc bone 710mm
- crankset: race face next carbon cranks 2x
- cassete: 10sp xtr
- rdr: xtr
- fdr: xt
-chain: kmc (not the nitrite one)
-shifters: xt
-brakes: xtr
-rotors: xt ice tech 180mm/160mm
-seatpost: kcnc ti pro light 27,2
-saddle: Saevid carbon
-bottle holders: xmcarbon
-tires: Schwalbe thunderburt tl 2.1
-pedals: crank brothers eggbeater 2
final weight is 9,2kg, i was expecting less than this, but im working on it, I've bought Ti spindles for the pedals, carbon bar and a stem from lyti bikes, and a carbon seat post from hylix (only discovered lyti today). I have a pair of lightweight Quark rotors (+/-80gr each) witch i will change.
in my wishlist is a dt swiss odl opm race fork.
im looking to achieve the low 8kg setup. I use to ride 2-3 times a week 30-50km, off road with hard climbs, and sometimes i run marathons. My goal is to get ready to a 3 days 300km marathon in azores islands in April.
pics bellow:
http://s2.postimg.org/bgzs9a3m0/image.jpg
http://s23.postimg.org/drvii7mq2/image.jpg
http://s23.postimg.org/wlhbf7ky2/image.jpg
http://s23.postimg.org/ued2rafnu/image.jpg
http://s23.postimg.org/r2erxznwq/image.jpg
http://s23.postimg.org/ey43ur0ei/image.jpg
http://s23.postimg.org/jl5kirydm/image.jpg
http://s2.postimg.org/g0c0uslhk/image.jpg
Last edited by aero on Sun Nov 22, 2015 10:45 am, edited 1 time in total.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com