Suggestions on Polishing titanium

Discuss light weight issues concerning road bikes & parts.
Post Reply
Bill F
Posts: 56
Joined: Thu Jan 08, 2004 5:08 pm
Location: Whitecourt AB CN

by Bill F

Any suggestions on the simplist way of polishing scratches out of titanium. I'm not looking at getting back to the original shine/finish - just getting rid of some unsightly abrasions.

by Weenie


Weisse Luft
Posts: 148
Joined: Mon May 10, 2004 4:44 pm
Location: All over Texas

by Weisse Luft

3M makes a line of automotive finishing abrasive paper in grades as fine as 2000 grit. You should be able to duplicate the factory finish with these, testing on the BB shell or a piece of scrap.

The abrasive is Silicon Carbide which is a very sharp and hard abrasive, capable of fast action on Ti. The paper is also used wet which helps the finish process. With 2000 grit, the finished look is a medium polish, not mirror though. You need cerium oxide to bring out a mirror shine.

User avatar
Superlite
Posts: 2492
Joined: Fri Aug 29, 2003 9:01 pm

by Superlite

Just find a metal polisher, you'll be better off. Polishing metal, esp. a hard metal like Ti can be very difficult. I personally don't think it's something t odo yourself, unless you have knowledge on the subject and proper buffing equipment.

If its just a few scratches you want buffed out it probley won't set you back more then $20. I had my old frame polished for just $80, looked friggin awsome with the mirror finish. Have a professional do it, and save the headachs.

tyson12zoll
Posts: 39
Joined: Tue Jun 08, 2004 4:32 am
Location: St. Louis, USA

by tyson12zoll

I've had the best luck with scotch brite pads. You can create a great finish with them. Seven Cycles recommends scotch brite pads for replenishing the factory finish to their frames.

User avatar
cadence90
Posts: 1695
Joined: Sun Dec 14, 2003 1:52 am

by cadence90

Jewelers Rouge on ScotchBrite pad or polishing cloth.
"Gimondi è un eroe umano, che viene sconfitto ma che continua la sua corsa fino a tornare a vincere." - Enrico Ruggeri

Post Reply
  • Similar Topics
    Replies
    Views
    Last post