Ultegra RX road clutch RD for 2x11 and 2x10

Especially for light weight issues concerning cyclocross / touring bikes & parts.

Moderator: Moderator Team

Nefarious86
Moderator
Posts: 3046
Joined: Sun May 25, 2014 4:57 am
Contact:

by Nefarious86

Add some more tension?

Sent from my SM-G975F using Tapatalk

Using Tapatalk

by Weenie


emotive
Posts: 150
Joined: Tue Nov 01, 2016 10:40 am
Location: Melbourne, Australia

by emotive

Beancouter wrote:
Wed Apr 10, 2019 7:07 am
Quick question, anyone know of any issues (or Shimano guidance) on using the RX805 with an oval ring? I have it set up on my Hakka with a wolftooth elliptical (42x) and the clutch doesn’t seem to be holding (certainly not as well as I would expect).
I ran the RX800 with Absolute black oval rings for a few thousand kilometres with no issues.

User avatar
FIJIGabe
Posts: 1819
Joined: Tue Sep 11, 2012 6:07 pm
Location: The Lone Star State

by FIJIGabe

Can you post a photo of your setup? Maybe the chain is too long, but I agree with Nefarious86 - not enough tension (or the clutch is disengaged).
Madone 9 - https://bit.ly/2Nqedbn
Emonda SLR - https://bit.ly/2UK5FP8
Crockett - https://bit.ly/2Xem4sk

Madone 5, Cobia. I own a lot of Treks.

Beancouter
Posts: 426
Joined: Fri Apr 20, 2012 9:04 pm

by Beancouter

On hols at the moment - will do when I get home. Should have said, running a wolftooth roadlink DM.




Sent from my iPhone using Tapatalk

spdntrxi
Posts: 2759
Joined: Sat Jul 20, 2013 6:11 pm

by spdntrxi

Beancouter wrote:
Wed Apr 10, 2019 7:07 am
Quick question, anyone know of any issues (or Shimano guidance) on using the RX805 with an oval ring? I have it set up on my Hakka with a wolftooth elliptical (42x) and the clutch doesn’t seem to be holding (certainly not as well as I would expect).

Not sure if it is the derailleur itself or my set up.



Sent from my iPhone using Tapatalk
I also used absolute black rings... my RX805 would not shift (with the clutch on) down to the high gear.. like 11-12-14... with clutch off I never had an issue. I went 1x and XTR Di recently.. no problem.

brinjo
Posts: 2
Joined: Sun Jun 23, 2019 6:55 am

by brinjo

spdntrxi wrote:
Thu Apr 11, 2019 9:45 pm
I also used absolute black rings... my RX805 would not shift (with the clutch on) down to the high gear.. like 11-12-14... with clutch off I never had an issue. I went 1x and XTR Di recently.. no problem.
What do people reckon about the clutch/motor combo in the RX805? I've got a brand new one, and same issue, the motor struggles to change to larger cogs with the clutch on. Does the tension need to be backed off heaps for it to shift properly? I need to experiment with backing off the clutch tension, but hopefully it doesn't need to be so low that tension is similar to that with the clutch off!

spdntrxi
Posts: 2759
Joined: Sat Jul 20, 2013 6:11 pm

by spdntrxi

yeah I never could get an explaination for it.. my tension was set to medium... you can try low and see if it helps. It was a downer so I just used it as and excuse to jump to XTR :)

User avatar
FIJIGabe
Posts: 1819
Joined: Tue Sep 11, 2012 6:07 pm
Location: The Lone Star State

by FIJIGabe

I had to set the tension on my XT RD low, in order to get the shifting correct. I was constantly trying to trim the derailleur with the clutch on, but once I turned the tension down, the problems went away. Also, even at low tension, it is nothing like having the clutch off.
Madone 9 - https://bit.ly/2Nqedbn
Emonda SLR - https://bit.ly/2UK5FP8
Crockett - https://bit.ly/2Xem4sk

Madone 5, Cobia. I own a lot of Treks.

Hex
Posts: 108
Joined: Sun Sep 09, 2018 10:30 am

by Hex

Is there an issue with the RX800 (mechanical) RD as well?

Would the tension need to be dialed down in order to shift properly?

I'm considering either getting that or an XT+tanpan for my next build and I'd like to know some experiences with the RX mech.

MichaelB
Posts: 573
Joined: Tue Apr 22, 2008 4:31 am

by MichaelB

Hex wrote:
Thu Jun 27, 2019 12:24 pm
Is there an issue with the RX800 (mechanical) RD as well?

Would the tension need to be dialed down in order to shift properly?...
Haven't had to do any adjustments on mine and it shiifts fine with 36/46 & 10-42 cassette

Hex
Posts: 108
Joined: Sun Sep 09, 2018 10:30 am

by Hex

MichaelB wrote:
Fri Jun 28, 2019 12:31 am
Hex wrote:
Thu Jun 27, 2019 12:24 pm
Is there an issue with the RX800 (mechanical) RD as well?

Would the tension need to be dialed down in order to shift properly?...
Haven't had to do any adjustments on mine and it shiifts fine with 36/46 & 10-42 cassette
Cool. Thanks for the reply!

gummee
Posts: 95
Joined: Thu Jun 14, 2012 3:01 pm

by gummee

I've got 2 of the Ultegra RX rear derailleurs. Best thing ever for gravel riding! Haven't raced CX on em yet, but I can't see why they won't be the bee's knees there too

No more chain slap!

I jumped on my XTR 10sp mtn bike without the clutch and had to remember to shift up to the big ring to keep the chain slap down.

M

brinjo
Posts: 2
Joined: Sun Jun 23, 2019 6:55 am

by brinjo

gummee wrote:
Fri Jul 05, 2019 1:51 am
I've got 2 of the Ultegra RX rear derailleurs. Best thing ever for gravel riding! Haven't raced CX on em yet, but I can't see why they won't be the bee's knees there too

No more chain slap!

I jumped on my XTR 10sp mtn bike without the clutch and had to remember to shift up to the big ring to keep the chain slap down.

M
Great to hear it's working well for you. Are your RX derailleurs di2? Did you have to back off the clutch tension to get them to shift?

Post Reply
  • Similar Topics
    Replies
    Views
    Last post