Cable routing problem on Cube Litening frame

Discuss light weight issues concerning road bikes & parts.
Post Reply
long19000
Posts: 14
Joined: Thu Feb 25, 2016 2:45 pm

by long19000

I've just got my 2016 Cube litening c68 teamline frameset.
However, the're just two holes on the headtube cable entries, cable housing with ferrule can go straight through.
There is nothing holding them.
Am I missing some parts? HELP
Thanks.
IMG-20180309-WA0002.jpg

sharkman
Posts: 1401
Joined: Fri Jun 25, 2004 8:32 pm
Location: the Netherlands

by sharkman

You’ll need two black cable stops fitting the holes for the canbles


Verzonden vanaf mijn iPhone met Tapatalk

kode54
Posts: 1187
Joined: Tue May 23, 2006 9:39 pm

by kode54

some frames have a pass through for the entire cable housing. it looks like that. holes that accommodate cable stops are much larger...at least what i've seen.
- AX Lightness Vial EVO D + DA9150 + Enve SES 3.4 carbon hubs
- Parlee Altum + DA9150 + Enve SES 4.5 carbon hubs
- Parlee ESX + DA9150 + THM SRM PM + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + DA9100 + Enve 3.4 CK hubs

User avatar
wheelbuilder
Posts: 436
Joined: Wed Feb 08, 2017 2:10 am

by wheelbuilder

You should a small plastic bag somewhere with all the frame bits included. Unless you accidentally threw it away.

sharkman
Posts: 1401
Joined: Fri Jun 25, 2004 8:32 pm
Location: the Netherlands

by sharkman

This is how it looks installed
If i remember well there are two small black cable stops

Image


Verzonden vanaf mijn iPhone met Tapatalk

sib
Posts: 108
Joined: Mon Jun 15, 2015 2:03 am

by sib

I can't help you with the cable stops, but I'm very interested in a frame and fork weight!

long19000
Posts: 14
Joined: Thu Feb 25, 2016 2:45 pm

by long19000

54cm Frame with hanger and cable guide (except those missing! ), without bottle cage bolts, seat clamp weights 942g
Uncut fork weights 322g

Thanks for all your help!

happyon2wheels
Posts: 50
Joined: Wed Jan 31, 2018 8:17 am
Location: Denmark

by happyon2wheels

long19000 wrote:
Wed Mar 14, 2018 6:15 pm
I've just got my 2016 Cube litening c68 teamline frameset.
However, the're just two holes on the headtube cable entries, cable housing with ferrule can go straight through.
There is nothing holding them.
Am I missing some parts? HELP
Don't know if you solved the issue, but I recently built up exactly the same frame. There is a built-in cable housing stop in the headtube, it just sits a bit deep. The only place you will need to insert a small plastic stop is the exit of the rear brake cable from the toptube and the exit of the two derailleur cables (but that should all be included in the frame.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post