veloplugs with boyd wheels?

Discuss light weight issues concerning road bikes & parts.
Forum rules
Post Reply
Bianchi10
Posts: 775
Joined: Mon Sep 17, 2012 10:53 pm

by Bianchi10 on Sat Jan 12, 2013 7:37 am

Anyone happen to know if veloplugs (red or yellow) will fit a set of Boyd Vitesse 30mm aluminum clnchers?
Top
mnmasotto
Posts: 623
Joined: Mon Jun 06, 2011 7:16 pm
Location: Irvine, CA

by mnmasotto on Mon Jan 14, 2013 3:04 am

Call Boyd on the phone and ask them the diameter of the spoke holes. The veloplugs come in two sizes red and yellow. I am sure the guys at Boyd will know which size to order.
Top

by Weenie on Mon Jan 14, 2013 3:04 am

Top
User avatar
btompkins0112
Posts: 2693
Joined: Fri Feb 11, 2011 3:04 am
Location: Mississippi

by btompkins0112 on Mon Jan 14, 2013 3:08 am

Aren't those just XR300's?

If they are, I think they take the yellow ones.

EDIT: if they are XR300's they are the red ones.
Last edited by btompkins0112 on Mon Jan 14, 2013 3:12 am, edited 1 time in total.
Top
fdegrove
Tubbie Guru
Posts: 5859
Joined: Tue May 03, 2005 2:20 am
Location: Belgium

by fdegrove on Mon Jan 14, 2013 3:09 am

Hi,

From memory, the yellow ones are 8mm while the red ones are a tad bit wider coming in at 8,3 mm if that helps.
If you don't want to contact the manufacturer just use a calliper and measure the diameter of the holes.

Ciao, ;)
Being a snob is an expensive hobby.
Top
robertg
Posts: 491
Joined: Sun Dec 10, 2006 10:21 pm
Location: NJ, USA
Contact:
Contact robertg

by robertg on Mon Jan 14, 2013 1:42 pm

fdegrove, it is actually the opposite, as the red ones are smaller than the yellows.
Top
Post Reply

Return to “Road”

  • Similar Topics
    Replies
    Views
    Last post