SRAM XX spider chainrings compatible with non spider crank?

Discuss light weight issues concerning mountain bikes & parts.

Moderator: Moderator Team

Post Reply
02GF74
Posts: 570
Joined: Thu Jan 13, 2011 4:04 pm
Location: Sunny UK

by 02GF74

... yet another SCRAM XX related post

Will the SRAM chainrings that fit on the spider fit onto a SRAM crank? (the rings do look very similar to my untrained eye)

The spider I refer to is this:
Image

And SRAM one piece crank I refer to is:
Image

User avatar
cerro
Posts: 1383
Joined: Fri May 12, 2006 2:11 pm
Location: Stockholm, Sweden
Contact:

by cerro

No, can't change spider on a XX. Just X.0 and X.9, maybe also X.7
/jonas l
http://cerrol.wordpress.com (my cyclingblog)

02GF74
Posts: 570
Joined: Thu Jan 13, 2011 4:04 pm
Location: Sunny UK

by 02GF74

sorry, not sure my question was clear - I am asking if the rings taken off the spider will fit onto the crank? (spider is thrown away)

surely as a manufacturer you would design spider and crank to take one type of ring instead of designing 2 different types of ring???? so I am hoiping somebody has tried this andthe answer being yes :)

damond
Posts: 157
Joined: Thu Jun 03, 2010 12:47 pm

by damond

Yes!

As long as the rings have the same BCD they will fit. As on the pictures you show, both rings are XX (120/80 BCD) so they will fit on that specialized spider as well as they will fit on a XX cranks.

scott_racer
Posts: 98
Joined: Sat Sep 23, 2006 11:30 am
Location: Melbourne, Australia

by scott_racer

Just be careful with the 'chain drop' pin on the big ring. There are 3 lengths for BB30, GXP and Cannondale cranks.
Start flat out ... then pick the pace up halfway

tompho
Posts: 68
Joined: Tue Mar 13, 2012 8:37 am

by tompho

If both rings (inner an outer) have the same BCD (120/80), you can put in XX crankset.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post