Moderator: Moderator Team
pretty much setup as shown. nothing fancy really imho, just parts laying around that i wanted to use.
fizik arione cx
easton equipe bars
easton ea90 stem
short avid ultimates
fulcrum 7s with mich mud 2s and mich jets
ceramic black box bb
weight is just under 18.5lbs with the fulcrum 7s. It rides nice and i like the frame. Glad i got it. I dont race cx much , but would like to try tubulars next year probably. Also please excuse the lack of 46x11 for pictures hah.
oh it has white lizard skin 1.8mm tape now. The sram tape (which i go with the bike and reused) was too firm =\
cerro wrote:Nice, also thinking about updating my cx next year for Chorus. Is good mounting brakewirestop like that on the stem?
The brake cable stopper in the stem works OK, just have to use as much toe-in in the pads as possible to stop brake judder...
Stock 2010 Colnago World Cup except the Ultegra compact crank and Enduro Ceramic BB fitted by the previous owner.
Changes by me so far was to replace the saddle with an SLR, retape the bars and fit a longer stem.
Will look at rotating the bars down and drop some spacers.
simon wrote:@commfire: SICK build! any spacers between bb and crank?will be putting a cannondale srm on my f1 frame and think it's a pretty tight fit.
Thanks Simon. It is a fun/fast bike. The cannondale crank does fit fairly snug on the frame. As far as I can tell no spacers used but I will admit my LBS installed it.
Be sure to post pics of your F1. Not enough of those on here. I was thinking that might be my next road frame
- Similar Topics
- Last post