I really need help with a new Super Record 11 gruppo that is making a lot of noise. I recently switched from Force to SR, and the SR is LOUD. Like, kind-of-embarrassing because other people I ride with comment on how loud it is.
Here's the deal: the bike starts off quiet at first, but when I get the bike up to speed, the rear derailleur starts making a loud clattering sound with every pedal rotation. It almost sounds like there's a problem with cable tension, but I don't think that's the case. The shifting is clean, quiet and precise. It just makes a ton of chain noise.
I make sure to check cable tension before every ride and it's usually pretty quiet for the first 10 miles or 7-8 shifts, which ever comes first. But then suddenly the noise returns for no real apparent reason. But the really infuriating thing is when I put it up in the stand after a ride, I don't hear the noise.
I've checked derailleur height, derailleur alignment, cable tension, chain length, etc... and I can't find anything wrong. I've tried three different chain lubricants. I've taken it to my trusted mechanic and he can't find anything wrong with my build. I even drove an hour and a half to a Campy certified mechanic, and he couldn't find anything. He was able to recreate the noise when he took it for a ride, but was a little mystified why it was quiet in the stand.
If anyone has any solutions or suggestions I'd love to hear it, because Santo Tullio forgive me, I'm pretty close to just selling the SR gruppo and going back to SRAM.
My set up is: BMC Team Machine SLR01, Reynolds Assault wheels (hub rebuilt with Campy 11 speed axle and freehub), SR rear derailleur, Record 12-27 cassette, Chorus chain (all that was in stock).
please use search, there are many topics on this
It is unusual to check cable tension before each ride, so the problem could be user-induced. Generally just set it once and forget it.
There have been quite a lot of threads over the last couple of years raising the cable routing issue. This would be my #1 choice. A simple test is just to disconnect it at the RD and pull it back and forward by hand from the shifter end and RD end. You should feel it moving nice and smoothly.
It does not sound like chain or cassette.
It's always worth checking RD hangar alignment too, but since you say the problem is intermittent, I'm going with poor cable routing and too much friction.
How many drivers does a buggy have?
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
- Similar Topics
- Last post
- 27 Replies
- 2151 Views
Last post by GorrGrimWolf
Sat Dec 09, 2017 3:48 pm
- 4 Replies
- 1196 Views
Last post by joeyb1000
Fri Aug 04, 2017 4:41 pm
- 5 Replies
- 384 Views
Last post by mike
Thu Mar 08, 2018 8:42 pm
- 29 Replies
- 2549 Views
Last post by TonyM
Wed Nov 01, 2017 5:29 am
- 1 Replies
- 569 Views
Last post by avispa
Mon Oct 30, 2017 10:21 pm