http://www.bicyclehero.com/gb/wheels-mf ... -sram.html
with any success.
I believe the Specialized OSBB is narrower than a standard BB30 so shims might also be required.
Any advice with regards to fitting the chainset would be appreciated.
http://wheelsmfg.com/complete-crankset-bb-adapter-guide" onclick="window.open(this.href);return false;
part numbers you would need are:
http://wheelsmfg.com/products/bottom-br ... pacer.html.
http://wheelsmfg.com/products/bottom-br ... ranks.html.
The PF3.5-SPC adds the 7mm to the BB width to get to the standard 68mm. The PF30-SRAM adapters allow you to install a 24/22 GXP crank in the PF30 bearing with an inside dia. of 30mm. They also take up the space occupied by external bearing cups.
http://wheelsmfg.com/products/bottom-br ... -sram.html
The Specialized cups and bearings space the bearings to normal BB30 width.
Briscoelab wrote:Actually, if you are using the Specialized cups and bearings all you need is the
Nope, I've tried this on my SL3. The BB30 adapters rub on the plastic cups in the frame. The lip on a BB30 bike is smaller and the adapters work just fine on my SL2 with BB30
The kicker is, on the MTB side, they did in face go to a standard PF30 carbon shell a couple years back. Go figure.
- Similar Topics
- Last post
- 0 Replies
- 161 Views
Last post by happyon2wheels
Sun Apr 29, 2018 2:28 pm
- 18 Replies
- 2782 Views
Last post by L3X
Tue Dec 12, 2017 9:15 pm
- 10 Replies
- 1907 Views
Last post by pyrahna
Fri Sep 08, 2017 9:36 pm
- 0 Replies
- 605 Views
Last post by itsacarr
Tue Jun 20, 2017 3:56 pm
- 20 Replies
- 2156 Views
Last post by jfranci3
Sun Jan 07, 2018 3:03 am