Moderator: Moderator Team
FireSpitter wrote:Haven't seen how much it costs but it's worth a try if it ain't too costly, me thinks.
the picture is a link to the advers, to save you clicking , they cost £17.99
the are "Made from super strong high grade 7076 T6 Aluminium"
A quick look on ebay at other light clamps:
17 g KCN 7075
13 g KCNC clamps are made from 7075-T6
13 g post from 6061
9.8 g MT XZoom 7075
comparison of Al alloys
T6 temper 6061 has an ultimate tensile strength of at least 42,000 psi (300 MPa) and yield strength of at least 35,000 psi (241 MPa).
7075 has an ultimate tensile strength of at least 67 - 78,000 psi (462 - 538 MPa) and yield strength of 54 - 67,000 psi (372-462 MPa).
7075 Tensile Strength, Ultimate 510 MPa 74000 psi and Tensile Strength, Yield 470 MPa 68200 psi
Seller link below
http://www.ebay.co.uk/itm/Ultralight-Se ... 43ae07b348
Having lightly greased the outer seattube and inner clamp and also turned it around so the slot faces forwards (all the tricks I could find online for lightweight clamps) it seem to be holding well. My scale is only accurate to the gram and it shows up as 6g... pretty awesome!
Will update if I encounter any problems (touch wood there will be not updates!)
sent from my galaxy SIII
Run these on every single build with a standard seat post. Never had an issue.
34.9mm: 9 g
http://www.procyclingworld.com/servlet/ ... sh-/Detail
AERO & LIGHT is RIGHT
Cervelo SLC 5960g/13.13 lbs
bringing this post back to life now
Any other feedback on this clamp?
Have been looking for another seatclamp to match my WW build, but it must have no more then 12mm height, this checks on that department and weight as well.
You guess it would be a safe buy or should I been looking at another one?
- Similar Topics
- Last post
- 1 Replies
- 497 Views
Last post by Klaster1
Thu Nov 02, 2017 11:42 am
BH ULTRALIGHT EVO DA 9070 made by "Le Baron Noir"
Last post by idinfo68 « Wed Feb 28, 2018 8:25 amReplies: 9
Posted in Introduce Yourself / Gallery - Please use metric weights.by idinfo68 » Mon Feb 26, 2018 10:06 am » in Introduce Yourself / Gallery - Please use metric weights.
- 9 Replies
- 1058 Views
Last post by idinfo68
Wed Feb 28, 2018 8:25 am
- 2 Replies
- 504 Views
Last post by silvalis
Sun Sep 24, 2017 2:52 am
- 15 Replies
- 1317 Views
Last post by MoPho
Wed Aug 23, 2017 10:14 pm
- 2 Replies
- 316 Views
Last post by Rumsas
Fri Feb 16, 2018 9:42 pm