my cervelo from France

Who are you (no off-topic talk please)

Moderator: Moderator Team

Post Reply
User avatar
steff
Posts: 159
Joined: Tue Oct 05, 2010 4:09 pm
Location: FRANCE

by steff

in add , the new sram red is very hard to lightnen
you can't put carbon clamp without machining the body
original mech plate from rear derailleur are ligh too
I just hope that btp will make some carbon hoods
after that I will see if I machin the shifter or not

gumgardner
Posts: 3553
Joined: Sat Jan 06, 2007 9:47 pm
Location: Pittsburgh

by gumgardner

Steff...this is one of my favorite bikes on the forum. Congrats :beerchug:

konky
Posts: 839
Joined: Mon Dec 14, 2009 6:26 pm

by konky

gumgardner wrote:Steff...this is one of my favorite bikes on the forum. Congrats :beerchug:



I agree. It's a 100% hard useable bike. Superb. But what's the weight!?

User avatar
steff
Posts: 159
Joined: Tue Oct 05, 2010 4:09 pm
Location: FRANCE

by steff

gumgardner wrote:Steff...this is one of my favorite bikes on the forum. Congrats :beerchug:


thanks a lot

I modified the first post
total weight is 4,41 kg


As soon as possible I will add other pics with all parts

User avatar
steff
Posts: 159
Joined: Tue Oct 05, 2010 4:09 pm
Location: FRANCE

by steff

combo
Photo 782.jpg


P0953[01]_25-02-10.JPG

User avatar
steff
Posts: 159
Joined: Tue Oct 05, 2010 4:09 pm
Location: FRANCE

by steff

stem
Photo 776.jpg

User avatar
steff
Posts: 159
Joined: Tue Oct 05, 2010 4:09 pm
Location: FRANCE

by steff

handlebar
cintre mcfk 002.jpg

front derailleur
I didn't keep this one because it was not stiff enought
DSCF1795.JPG
Last edited by steff on Tue May 08, 2012 4:13 pm, edited 1 time in total.

User avatar
steff
Posts: 159
Joined: Tue Oct 05, 2010 4:09 pm
Location: FRANCE

by steff

rear derailleur
carbonschmiede mech plate, extralite pulley, schmolke carbon pulley screws,carbon stop machined screws
cintre mcfk 012.jpg

front wheel
I bought tune carbon rear axle
I machined it and machined carbon washer to maintain the bearings
original axle
DSCF1470.JPG

my axle
DSCF1471.JPG

DSCF1479.JPG

DSCF1787.JPG

rear wheel
DSCF1789.JPG
Last edited by steff on Tue May 08, 2012 4:11 pm, edited 2 times in total.

gumgardner
Posts: 3553
Joined: Sat Jan 06, 2007 9:47 pm
Location: Pittsburgh

by gumgardner

Steff,
Is that a confirmed weight or did you just add up the individual components?

User avatar
steff
Posts: 159
Joined: Tue Oct 05, 2010 4:09 pm
Location: FRANCE

by steff

frame
pieces 2009 001.jpg

User avatar
steff
Posts: 159
Joined: Tue Oct 05, 2010 4:09 pm
Location: FRANCE

by steff

gumgardner wrote:Steff,
Is that a confirmed weight or did you just add up the individual components?


yes it is confirmed weight

User avatar
steff
Posts: 159
Joined: Tue Oct 05, 2010 4:09 pm
Location: FRANCE

by steff

carbon cables guide
Photo 700.jpg

handletape
pieces 2009 017.jpg

Tytoune
Posts: 44
Joined: Sat Nov 27, 2010 1:10 pm

by Tytoune

4,41kg...

C'est quand même pas rien... :mrgreen:

User avatar
steff
Posts: 159
Joined: Tue Oct 05, 2010 4:09 pm
Location: FRANCE

by steff

Tytoune wrote:4,41kg...

C'est quand même pas rien... :mrgreen:


oh un veloptimalien :beerchug:

User avatar
steff
Posts: 159
Joined: Tue Oct 05, 2010 4:09 pm
Location: FRANCE

by steff

shifters
DSCF4011.JPG

Post Reply
  • Similar Topics
    Replies
    Views
    Last post