Cannondale Evo pressfit bb30 fit old wired SRM?

Discuss light weight issues concerning road bikes & parts.
Post Reply
User avatar
Scooter
Posts: 232
Joined: Tue Dec 19, 2006 4:21 am
Location: Maryland

by Scooter

Alright finally started to build my Evo and am attempting to install my wired SRM but it appears to be bottoming out. I tried with the normal 3 nylon spacers which clearly didn't work. Then attempted 5 spacers but still seems a tight and I haven't even torqued it.


Anyone else running a wired SRM on an Evo? Is it even possible without ghetto rigging? Looking for an excuse to go wireless lol but dont have the funds right now :(
Cannondale 2013 SuperSix EVO Black Inc w/SRM
Cannondale CAAD 10 Team custom paint
Cannondale 2009 Slice HiMod
Cannondale CAAD 8 f/s w/BB30 (last US built CAAD8)
Surly Ice Cream Truck

User avatar
hmai18
Posts: 650
Joined: Mon May 15, 2006 12:19 am
Location: Vancouver, BC, Canada.

by hmai18

I seem to recall there being a BB spindle specifically for SRM.

by Weenie


User avatar
Scooter
Posts: 232
Joined: Tue Dec 19, 2006 4:21 am
Location: Maryland

by Scooter

I have the SRM spindle and new locking for Evo.
Cannondale 2013 SuperSix EVO Black Inc w/SRM
Cannondale CAAD 10 Team custom paint
Cannondale 2009 Slice HiMod
Cannondale CAAD 8 f/s w/BB30 (last US built CAAD8)
Surly Ice Cream Truck

steel515
Posts: 82
Joined: Sun Jan 02, 2011 2:03 am

by steel515

[quote="Scooter"]Alright finally started to build my Evo and am attempting to install my wired SRM but it appears to be bottoming out. I tried with the normal 3 nylon spacers which clearly didn't work. Then attempted 5 spacers but still seems a tight and I haven't even torqued it.

i thought canondale is not pressfit bb30?

User avatar
Scooter
Posts: 232
Joined: Tue Dec 19, 2006 4:21 am
Location: Maryland

by Scooter

steel515 wrote:
Scooter wrote:Alright finally started to build my Evo and am attempting to install my wired SRM but it appears to be bottoming out. I tried with the normal 3 nylon spacers which clearly didn't work. Then attempted 5 spacers but still seems a tight and I haven't even torqued it.

i thought canondale is not pressfit bb30?



Evo is. They ship them with SRAM press fit bearings and covers.
Cannondale 2013 SuperSix EVO Black Inc w/SRM
Cannondale CAAD 10 Team custom paint
Cannondale 2009 Slice HiMod
Cannondale CAAD 8 f/s w/BB30 (last US built CAAD8)
Surly Ice Cream Truck

User avatar
itsacarr
Posts: 733
Joined: Fri Nov 14, 2008 4:55 am
Contact:

by itsacarr

I have an EVO that I used the cdale wireless srm on with both black and clear spacers - I had an extra few in there with the specific spindle and bearing shield but it worked fine. And yes the bottom bracket is PF30.

It was all a tight fit which I didn't care for but it did built well.

User avatar
Scooter
Posts: 232
Joined: Tue Dec 19, 2006 4:21 am
Location: Maryland

by Scooter

itsacarr wrote:I have an EVO that I used the cdale wireless srm on with both black and clear spacers - I had an extra few in there with the specific spindle and bearing shield but it worked fine. And yes the bottom bracket is PF30.

It was all a tight fit which I didn't care for but it did built well.



Do you remember how many spacers you used? I know Liquigas runs the wireless so knew that would work just wasn't sure if there is a profile difference between wired and wireless that makes the wired harder to mount or just not possible.
Cannondale 2013 SuperSix EVO Black Inc w/SRM
Cannondale CAAD 10 Team custom paint
Cannondale 2009 Slice HiMod
Cannondale CAAD 8 f/s w/BB30 (last US built CAAD8)
Surly Ice Cream Truck

User avatar
ms6073
Posts: 2393
Joined: Fri Jul 23, 2004 8:24 pm
Location: Houston, Texas

by ms6073

Even if you use the Cannondale specific pressfit 30 bottom bracket, I think you are going to have issues making this work due to the lack of clearance for the pressfit cups on the backside of the powermeter. I ended up using the Cannondale SRM bottom bracket as well as replacing an older model wireless Hollowgram SRM in order to make it work with a '12 Ridley X-night.
Michael - The Anaerobic Threshold is neither...

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post