Remove carbon paint
This has been covered alot here- use the 
But to get you started-
http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=79102
http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=83500

But to get you started-
http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=79102
http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=83500
- Frankie - B
- Administrator
- Posts: 6710
- Joined: Mon Jun 02, 2003 8:17 am
- Location: Drenthe, Holland
That seat post is not painted. The surface layer is epoxy.
Sent from my HTC.
Sent from my HTC.
Please follow me on Instagram'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'
- Frankie - B
- Administrator
- Posts: 6710
- Joined: Mon Jun 02, 2003 8:17 am
- Location: Drenthe, Holland
Why would you want to remove it?
Sent from my HTC.
Sent from my HTC.
Please follow me on Instagram'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'
Hi, just use some 600 grit wet and dry adbrasive paper then finish with 800 grit.
You can just leave just like that or get a car bodyshop to put some 2k clear top coat on it.
If you cannot find wet and dry then scotchbrite pads will do the same job.
good luck.
You can just leave just like that or get a car bodyshop to put some 2k clear top coat on it.
If you cannot find wet and dry then scotchbrite pads will do the same job.
good luck.

cymans wrote:Hi, just use some 600 grit wet and dry adbrasive paper then finish with 800 grit.
You can just leave just like that or get a car bodyshop to put some 2k clear top coat on it.
If you cannot find wet and dry then scotchbrite pads will do the same job.
good luck.
will it scratch the clearcoat ? i afraid after i send the wording part, the part will become white.
i have a very fine 3000 grid,can i use that?
Passoni Mirror
Passoni Xxti
Passoni Xxti
wshiong wrote:cymans wrote:Hi, just use some 600 grit wet and dry adbrasive paper then finish with 800 grit.
You can just leave just like that or get a car bodyshop to put some 2k clear top coat on it.
If you cannot find wet and dry then scotchbrite pads will do the same job.
good luck.
will it scratch the clearcoat ? i afraid after i send the wording part, the part will become white.
i have a very fine 3000 grid,can i use that?
I sanded my token seatpost. Got the decals off without touching the clearcoat ,I wet sanded it. In the end I sanded the clear off and used some 303 aero , It looks much better than the clear coat.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 360 Views
-
Last post by wheelsONfire
Sat Dec 08, 2018 10:41 am
-
- 10 Replies
- 902 Views
-
Last post by Calnago
Sat Sep 29, 2018 3:02 am
-
- 1 Replies
- 275 Views
-
Last post by bm0p700f
Mon Mar 12, 2018 11:36 pm
-
- 7 Replies
- 456 Views
-
Last post by Noctiluxx
Wed Jun 20, 2018 3:49 pm
-
- 1 Replies
- 288 Views
-
Last post by Jengaback
Mon Aug 27, 2018 9:08 am