I need to get new (headset) bearings for a Cannondale System six.
I believe the top bearing is 1 1/8 45x45, but what are the exact specs for the bottom bearing?
The FSA 1.5" bearing 90d shoulder MR069 seems to be what I need, but I just want to be 100% sure.
Will the bearings of a FSA Orbit C-40 headset fit fine?
Any help is appreciated - thank you!
Yes indeed the original Cannondale headset would fit fine, but I don't need a complete headset, just the bearings.
The FSA 1.5" bearing seems to be a close match - bearing I.D. and O.D. are the same, I just wanted to confirm.
I ordered a bearing described as being for the System Six from Qwerty Cycles, but when I removed mine I realised my original bearing had a taller stack height and had 45x45 870ACB stamped on it whereas in the description on Qwerty only 45 is mentioned and nothing is stamped on the bearing. I don't want to spend £70 on a complete headset when I only need one bearing
for example http://store.canecreek.com/p/40-is41-carbon-tall-top-assembly/headsets_40-series_integrated?pp=25
From the early days, Cannondale used Campy headsets, and still use the standard.
How many drivers does a buggy have?
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
- Similar Topics
- Last post
- 6 Replies
- 616 Views
Last post by jih
Wed May 09, 2018 5:45 pm
- 18 Replies
- 1252 Views
Last post by ms6073
Wed Apr 18, 2018 2:14 am
- 10 Replies
- 666 Views
Last post by Anders3404
Sat Mar 10, 2018 2:17 am
- 10 Replies
- 1595 Views
Last post by Mrseasons
Tue Jul 18, 2017 2:36 pm
- 2 Replies
- 936 Views
Last post by Zak
Fri Sep 15, 2017 10:20 pm