Moderator: Moderator Team
Well, let's get this party started!
First, the build list...
Colnago C59 Build 6.81 kg 15.0 lbs
(Grams followed by Description
Frame and Fork Assembly:
1126 C59 Frameset including pressed cups for headset bearings
4 BB cable guide and bolt
26 Seat post collar - Campagnolo (Colnago collar weighs same)
362 Fork after cutting approx 6cm length (uncut 384 grams)
32 Fork Insert
54 Headset Bearings
22 Headset Top Cover both short (12g) and tall (10g) combined
8 8mm carbon spacer and 3mm red anodized alloy spacer
1202 Campagnolo Bora Ultra Two - Rear
inlcudes Super Record 11/23 cassette/lockring and Continental Competiton 22 Tubular tire
64 Campagnolo Rear Skewer
856 Campagnolo Bora Ultra Two - Front
inlcudes Continental Competiton 22 Tubular tire
58 Campagnolo Front Skewer
Groupset: Campagnolo Super Record 2011
596 Crankset 53/39
44 Bottom Bracket Cups
72 Front Derailleur
158 Rear Derailleur
148 Rear Brake (Dual Pivot)
150 Front Brake (Dual Pivot)
334 Ergopower Shifters
236 Record Chain degreased less 2 links (244 - 8 grams)
246 Campagnolo Cables (uncut)
188 Saddle - Prologo Scratch Nack Pro
184 Seatpost - 3T Dorco LTD (350mm)
180 Handlebars - 3T Rotundo LTD 42 c-c
64 Bartape - Fizik Microtex Softouch
132 Stem - 3T Arx Team 120mm, -17 degree
186 Pedals - Look Keo Carbon Ti Blades
62 Two waterbottle cages - Arundel Mandible Carbon Matte Black
14 K- Edge chain catcher (18g - 4g for the bolt it replaces)
And now the pics... still don't really have a good profile shot but the weather just hasn't really been cooperating. Maybe I'll add some more later...
This next pic is interesting because I took an old cadence magnet from a Campagnolo Ergobrain computer and am hiding it in the pedal axle of the Look Keo Carbon Blades. It fits perfectly. Nice and Clean!
And this is really the "crown jewel" so to speak. I wanted something, anything, to try and make this mine. With money anyone can go out and buy all the parts, but I took the time to design my own stem cap on the computer then sent it to a machine shop to have it CNC'd and it came out perfect. I also didn't like the red stripe on the 3T Arx Team stem so I used acetone and some careful masking and rubbing to remove it. Also came out perfect, but be very careful with acetone. If it touches the white paint of the other logos they will get removed too. About 30 seconds of rubbing with acetone and fine steel wool is all it took...
So far, I have not found a better designed seatpost collar clamp than the one produced by Campagnolo and it's a no-brainer for me to swap whatever else might be there, so long as they're compatible...
And you gotta love the Made In Italy stamp wherever you see it...
And an 11/23 Super Record 11sp cassette for when I feel really fast...
Oh, and I opted for the "reintroduced" dual pivot rear brake as well. Used to have 'em, then Campagnolo went with the single pivot rear for a few years, but the stopping power and ability to keep them centered just doesn't work as well in my opinion even if you do save a few grams (please don't shoot me for saying that last bit)...
I also love the classic bend of the 3T Rotundo bars. But this is the first time I've had the LTD version and they are really really nice how they taper down the diameter instead of having more of an abrupt change in diamter like the Team version does. Also, they have grooves on front and back making cable routing really nice and smooth...
Well, that's about it for now. Hope you enjoyed the show. Time to get out and ride the stink out of this thing, and hopefully take a few more pics for the "On The Road Today" section of WW...
The top cap is a very nice bit and you are right it makes it your own!!!
Nice attention to detail. Hope you enjoy every second of riding it
Parlee Z5 XL (6055g/13.32lbs) Trek Madone 5.9 (7052-7500g)Jonesman Columbus Spirit (8680g)
Chase your dreams - it's only impossible until it's done
Traditional as it was meant to be
I dont even mind the bartape. I would done it with Prologo since it has the same sadlle.
How tall are you?
What is the seat height? From center of BB, to top of the sadlle.
How much is the seapost looking out of the frame? To the bottom of the sadlle rails??
In cm please
BTW, it again looks to me as the stem is pointing a litlle bit downwards...
- Similar Topics
- Last post
- 27 Replies
- 3968 Views
Last post by Calnago
Mon Jul 17, 2017 7:15 pm
since the colnago thread is dead...my recently updated c40
Last post by tids0009 « Fri Jun 30, 2017 12:18 amReplies: 12
Posted in Introduce Yourself / Gallery - Please use metric weights.by m4k1 » Thu Jun 22, 2017 9:21 pm » in Introduce Yourself / Gallery - Please use metric weights.
- 12 Replies
- 1989 Views
Last post by tids0009
Fri Jun 30, 2017 12:18 am
An Oldie but a Goodie of the Traditional Variety
Last post by RyanH « Wed Feb 07, 2018 8:32 pmReplies: 25
Posted in Introduce Yourself / Gallery - Please use metric weights.by RyanH » Sun Jan 28, 2018 8:22 am » in Introduce Yourself / Gallery - Please use metric weights.
- 25 Replies
- 2912 Views
Last post by RyanH
Wed Feb 07, 2018 8:32 pm
- 26 Replies
- 4834 Views
Last post by bm0p700f
Mon Aug 21, 2017 11:10 pm
- 15 Replies
- 985 Views
Last post by eric01
Sat Apr 07, 2018 12:07 pm