Farsports F1 Integrated Handlebar/Stem

[Agent041]

F1s

Do you perhaps also have option to mount Go-Pro or light under that F1s computer mount?

[lukaszzsch]

Yep, it’s already installed.




Wysłane z iPad za pomocą Tapatalk

[lukaszzsch]

Is anybody interested in selling the -3 degree sleeve?

I have just been fitted and my position still requires the change of cockpit angle. Unfortunately farsports probably has forgotten to enclose the sleeve to my shipment.


Wysłane z iPad za pomocą Tapatalk

[alanyu]

Is anybody interested in selling the -3 degree sleeve?

I have just been fitted and my position still requires the change of cockpit angle. Unfortunately farsports probably has forgotten to enclose the sleeve to my shipment.


Wysłane z iPad za pomocą Tapatalk

Why buy it? Email Farsports for that missing sleeve. It's their faulty

[lukaszzsch]

Done🫶


Wysłane z iPad za pomocą Tapatalk

[theOrtherion]

Anyone with a Focus Izalco Max that' using the Farsports F1s are having any trouble with the spacers? Mine Are rubbing the frame and im not sure what to do anymore.

[reedplayer]

Is anybody interested in selling the -3 degree sleeve?

I have just been fitted and my position still requires the change of cockpit angle. Unfortunately farsports probably has forgotten to enclose the sleeve to my shipment.


Wysłane z iPad za pomocą Tapatalk

Hello,

the F1 comes with an additional sleeve, which changes the stem angle from 10° to 7°(....probably at least if beeing used with 1 1/8 steerer diameter...), is that correct?

Short info highly appreciated, thank you very much!

[baumalein]

Is anybody interested in selling the -3 degree sleeve?

I have just been fitted and my position still requires the change of cockpit angle. Unfortunately farsports probably has forgotten to enclose the sleeve to my shipment.


Wysłane z iPad za pomocą Tapatalk

Hello,

the F1 comes with an additional sleeve, which changes the stem angle from 10° to 7°(....probably at least if beeing used with 1 1/8 steerer diameter...), is that correct?

Short info highly appreciated, thank you very much!

Its a 2° sleeve; so it changes the stem angle from -10 to either -12 or -8.

Edit: appearently they changed it to a -3° sleeve now; the old one I have (bought the bars in 2021) is also a bit lighter (5g vs 16g) than the new one I saw in this thread

[lukaszzsch]

It’s -3 degrees sleeve but I was informed that is included upon request.
Nevertheless they sent me such sleeve for free.





Wysłane z iPad za pomocą Tapatalk

[reedplayer]

Hello baumalein, Hello lukaszzsch,

thank you very much for answering, great info!

Best regards,

[reedplayer]

...and obviously it is no problem to run the F1 handlebar without, or just with very few, spacers.

Seems like a well-thought product, i only hope, deilvery-time does not take too long

source: https://www.bicycling.com/bikes-gear/a3 ... ou-faster/

[Agent041]

If someone is interested in F1 handlebar, you can also use coupon for 50usd discount:
FAR-OFF-50

[reedplayer]

If someone is interested in F1 handlebar, you can also use coupon for 50usd discount:
FAR-OFF-50

To late, I ordered the F1 handlebar today, directly at "Farsport", but did not find any hint to the discount-coupon!

https://www.farsports.com/products/f1-h ... 4081917103

[Agent041]

If someone is interested in F1 handlebar, you can also use coupon for 50usd discount:
FAR-OFF-50

To late, I ordered the F1 handlebar today, directly at "Farsport", but did not find any hint to the discount-coupon!

https://www.farsports.com/products/f1-h ... 4081917103

You can cancel the order and order it again with coupon They havent send you by now anyway

[Agent041]

I am planning to upgrade my gravel bike (handlebar) with 105Di2 and F1 handlebar for some time now. I was now thinking of upgrading the handlebar now, and Di2 later.

Does F1s fit mechanical gearing as well? and is it a hard setup? So 2 cable housing on each side?
Currently the handlebar is wider and is still space to cut the housings, so will try to mount it with housings already in the bike/frame.
Does anybody have any experiance?