Are We Getting A New Cannondale Supersix?

Discuss light weight issues concerning road bikes & parts.

Moderator: robbosmans

req110
Posts: 248
Joined: Thu Nov 22, 2018 10:23 am

by req110

Well If I can choose I would prefer to get some different colour as it will make me feel that I have new bike again.

And 2021 team replica is fine.
I also like 2020 ultegra di2 hi mod, the black/white combo.

I don't like the 2021 ultegra hi mod in red much.
#1 Cannondale SuperSix Evo Hi-Mod 2021 @ 6477g
#GR Factor LS AXS 2021 @ 83xxg
#XC Scott Spark RC 900 World Cup 2019 @ 9999g

Jackofallgrades
Posts: 160
Joined: Tue Oct 08, 2019 10:15 am

by Jackofallgrades

req110 wrote:
Sun Nov 01, 2020 11:59 am
Hello guys.
I have this on right side of my headtube, the paintwork is peeling off here.

It should be covered by warranty. "Paint and Decals: One year from original retail purchase."

I have contacted lbs, they told me to bring it and they will send it to distributor. I will do that soon most probably, unless you tell me there is no chance of getting replacement.

Can you guys share with me your experience?

1) is there probability of getting new frameset on RMA?

2) i bought the bike as ultegra kit, but replaced for sram red etap, i hope they won't have any problem with that

3) my frameset is 2020 team replica rapha / if i get new frameset, will they

a) find exact same 2020 team replica
b) replace with 2021 team replica
c) offer me some other hi-mod frameset
d) try to fucc me up with standard mod frameset?
That looks like damage caused by hitting the internal stops when steering (to stop the handlebars turning too far and destroying the internally routed cables). Not sure if that'll be covered under warranty, but if it is I agree, the service is usually a good one. If it's not, I'm fairly sure the damage is only cosmetic and wouldn't make it unsafe to ride.
Cannondale SSEvo3 'Atticus' - 7.2kg
...Work in Progress viewtopic.php?f=10&t=161634

by Weenie


req110
Posts: 248
Joined: Thu Nov 22, 2018 10:23 am

by req110

Interesting, but that stop is built on inner side of headtube, so this obviously stressed the paintwork enough to peel.
#1 Cannondale SuperSix Evo Hi-Mod 2021 @ 6477g
#GR Factor LS AXS 2021 @ 83xxg
#XC Scott Spark RC 900 World Cup 2019 @ 9999g

Geraint
Posts: 128
Joined: Thu Aug 06, 2020 7:46 am

by Geraint

req110 wrote:
Sun Nov 01, 2020 1:25 pm
Well If I can choose I would prefer to get some different colour as it will make me feel that I have new bike again.
So basically, you just fancy a new bike? :noidea:

If you have to draw a circle around the 'damage' in the pic then I think that says that it's not that bad...

User avatar
flashpunk
Posts: 72
Joined: Sat Jul 05, 2014 3:47 am
Location: San Francisco, CA
Contact:

by flashpunk

Jackofallgrades wrote:
flashpunk wrote:
Sun Nov 01, 2020 12:29 am
Jackofallgrades wrote:I'll have to check when I'm home tomorrow, but it could even be just 0.5. Nothing major, certainly when you feel the flex capacity in the frame just giving it a pull without the wheels in.
Where'd you get this spacer?
From a Cannondale rep. I haven't seen any official word on this issue, but given it's so easy to fix I'm not all that bothered... Not sure from their position why not make that announcement :noidea:
Ya mine is slowly getting worse, i mean it’s just a surface scratch, but kinda makes me angry that it’s acceptable to slowly saw away at the clear coat on a $7kUSD bike.


Sent from my iPad using Tapatalk

req110
Posts: 248
Joined: Thu Nov 22, 2018 10:23 am

by req110

Geraint wrote:
Sun Nov 01, 2020 3:12 pm
req110 wrote:
Sun Nov 01, 2020 1:25 pm
Well If I can choose I would prefer to get some different colour as it will make me feel that I have new bike again.
So basically, you just fancy a new bike? :noidea:

If you have to draw a circle around the 'damage' in the pic then I think that says that it's not that bad...
Here is more detail including video https://photos.app.goo.gl/v3xbyeUBXovr2Svq5
#1 Cannondale SuperSix Evo Hi-Mod 2021 @ 6477g
#GR Factor LS AXS 2021 @ 83xxg
#XC Scott Spark RC 900 World Cup 2019 @ 9999g

User avatar
LeDuke
Posts: 1860
Joined: Sun Oct 07, 2012 2:39 am
Location: Front Range, CO

by LeDuke

That video makes it look like impact damage. I’d avoid using that as “proof”; won’t help your cause.


Sent from my iPhone using Tapatalk

Maddie
Posts: 630
Joined: Tue Oct 17, 2017 5:44 am

by Maddie

Come on, that is barely noticable. Would be very generous if you get a new frame for that. If you've lost interest in your current paint scheme then why not go custom.

req110
Posts: 248
Joined: Thu Nov 22, 2018 10:23 am

by req110

That must be some vulnerable place, look at Simon Clarke bike.
LBS is in discussion with distributor. Waiting for insights.
Attachments
Capture.JPG
2.JPG
#1 Cannondale SuperSix Evo Hi-Mod 2021 @ 6477g
#GR Factor LS AXS 2021 @ 83xxg
#XC Scott Spark RC 900 World Cup 2019 @ 9999g

bet1216
Posts: 86
Joined: Thu Jul 18, 2019 10:52 pm

by bet1216

What is the length of the flat mount caliper bolts needed for the rear brake for a Shimano brake on the supersix?

User avatar
Dan Gerous
Posts: 2242
Joined: Sun Aug 12, 2007 6:28 pm

by Dan Gerous

bet1216 wrote:
Wed Nov 04, 2020 2:38 pm
What is the length of the flat mount caliper bolts needed for the rear brake for a Shimano brake on the supersix?
Whatever comes stock with Shimano calipers... at least that was the case with my DA 9100 brakes, for a 140mm rotor of course.

Omiar
Posts: 313
Joined: Wed Dec 14, 2011 8:20 pm

by Omiar

For 140mm rear rotor, Shimano stock bolts work fine.
Cannondale SystemSix R8070
Wilier Jena GRX
Scott Scale 935 build project
Sold:
Scott Foil Disc R8070
Scott Foil R6770
Scott Spark RC900 LTD M8000
Scott Scale 35

rmr40
Posts: 78
Joined: Sun Aug 07, 2016 9:32 pm

by rmr40

Any recommendations for how best to secure a Di2 battery in the knot D shaped post?


Sent from my iPhone using Tapatalk

hannawald
Posts: 1200
Joined: Sat Dec 17, 2016 7:28 pm
Location: Czech Republic

by hannawald

rmr40 wrote:
Wed Nov 04, 2020 6:18 pm
Any recommendations for how best to secure a Di2 battery in the knot D shaped post?


Sent from my iPhone using Tapatalk
Cannondale sells proprietary battery holder, part number K32180.

rmr40
Posts: 78
Joined: Sun Aug 07, 2016 9:32 pm

by rmr40

hannawald wrote:
rmr40 wrote:
Wed Nov 04, 2020 6:18 pm
Any recommendations for how best to secure a Di2 battery in the knot D shaped post?


Sent from my iPhone using Tapatalk
Cannondale sells proprietary battery holder, part number K32180.
Thanks... but sold out everywhere in the UK !


Sent from my iPhone using Tapatalk

by Weenie


Post Reply