Are We Getting A New Cannondale Supersix?

[Tifosiphil]

Hello guys, does anybody know the farsport handlebar cost?. Thanks

Enviado desde mi SM-N975F mediante Tapatalk

I was on their site earlier looking at wheels, think they are around $370 including the Garmin mount

[Hexsense]

One important thing to check is that the mount has been fitted with the 3m double sided pad (see 6 below). Mine wasn’t supplied with it. Install pictures sent to me by cannondale below...

Whoa, when I remove it to clean last time, I'm sure mine doesn't have such tape.
Any special spec for the tape that I should pay attention? I have gorilla double sided mounting tape. It is a little thicker than 3m double sided pad so I'm not sure if it would make an okay substitute for thin 3m tape.

[Beancouter]

If it were me I would just contact your LBS or cannondale for one, at least you know it’s the right spec (and it’s free!).

I am on holiday at the moment but hopefully mine will be at home when I get back tomorrow. I will take some pics


Sent from my iPhone using Tapatalk

[PUNlSHER]

An update on my Supersix Evo Ultegra rim brake build. When I first got the bike, it weighed at 8.14kg with pedals and bottle cages.

Since then, I have replaced several parts to bring the weight down to around 7.2kg.

• Saddle: Bontrage Montropose Pro (169g). Weight saving: 107g

• Seatpost: Cannondale Hollowgram SL 27 KNOT Carbon (162g). Weight saving: 99g

• Crankset: Cannondale Si Hollowgram (8-arm) (602g). Weight saving: 131g

• Handlebars: Zipp SL-70 Aero 38cm (222g). Weight saving: 88g

• Wheels: Parcours Grumpeur (1350g). Weight saving: 300g

• QR skewers: Parcours (55g*2). Weight saving: 90g

• Tyres: Continental GP5000 25mm (232g*2). Weight saving: 36g

• Inner tubes: Continental Race Light (76g*2). Weight saving: 58g

• Cassette: Ultegra 11-30 (269g). Weight saving: 35g

A groupset upgrade may come in the future to drop a bit more weight. I know I can also save a bit more on the crankset by going with SISL2 but 165mm cranks are not available for that series. I wasl also considering using a Kalloy Uno stem but not sure if I trust a £20 stem to hold my £200 carbon handlebars!

Kalloy UNO stem absolutely normal (102g without ti-bolts)

[Jackofallgrades]

What is the weight difference to a zero offset post from the standard offset Knot post? Any ideas? Or negligible?

[Dan Gerous]

What is the weight difference to a zero offset post from the standard offset Knot post? Any ideas? Or negligible?

Negligible. My zero setback post was 165.4gr, 168gr with the Di2 battery holder.

[Beancouter]

What is the weight difference to a zero offset post from the standard offset Knot post? Any ideas? Or negligible?

Negligible. My zero setback post was 165.4gr, 168gr with the Di2 battery holder.

I have swapped the clamp fittings from an old lightweight post and saved 25g!! Have bought another carbon base cradle which I am hoping has a slightly lower profile





Sent from my iPhone using Tapatalk

[Jackofallgrades]

Thanks guys

[LeDuke]

I have swapped the clamp fittings from an old lightweight post and saved 25g!! Have bought another carbon base cradle which I am hoping has a slightly lower profile





Sent from my iPhone using Tapatalk

Who makes that cradle/yoke?


Sent from my iPhone using Tapatalk

[Beancouter]

Cradle I have bought https://www.ebay.co.uk/itm/201074969276 . Preferably this will have a shallow curve to match the cut out on the seatpost .

Example yoke https://r2-bike.com/SCHMOLKE-Spare-Part ... O-Seatpost

https://www.ebay.co.uk/itm/292039170215

Total example (lots of options) from R2, less than 30g




Sent from my iPhone using Tapatalk

[req110]

Nothing. Delete

[lucianoz]

Hi guys, i'm a old user, but i never post anything, but really like to read all the threads.
Can you help me with a doubt?
I bought last week a 2020 SSX Evo di2 womens bike for my wife, but she wont use the knot bar/stem combo, so i'll put her beloved regular round bars and stem.
So, my question is for those who bought the bicycle with the knot bar/stem combo (or anyone who knows about the parts): Does the k28000 part come with the top cap (the circuled green thing in the pictures below, becouse i really dont know how to call this in english lol)?? I mean, all the parts off the picures bellow come with the bike when is bought with the knot bar/stem?




Cheers guys

[req110]

CANNONDALE SUPERSIX EVO INTERNAL SEAT BINDER, K26030
When does Cannondale make a new one ? mine is still making noise ...

I have been told there isn’t a new one.. that said, I have a replacement coming to me under warranty. I will check to see if there is any difference.

One important thing to check is that the mount has been fitted with the 3m double sided pad (see 6 below). Mine wasn’t supplied with it. Install pictures sent to me by cannondale below...


Sent from my iPhone using Tapatalk

I have removed the plate (which was rotated - bad) very easily there was something sticky, but not a tape, especially 3M. So i have built something like this and will give it a shot.

[req110]

Cradle I have bought https://www.ebay.co.uk/itm/201074969276 . Preferably this will have a shallow curve to match the cut out on the seatpost .

this one has negative review on ebay, they say it doesn't fit supersix, so i have canceled the order.

How about the one you have now? Where from it is, how does it look like on the bike and how much does it weight please?

[sohn]

Anyone experiencing a creaky bottom bracket with the 2020 Supersix Evo? Mine just randomly developed a creak today... Any tips for solving it?