CarbonWorks: new Garmin Wahoo mount for THM & MCFK & Darimo & Extralite

[CarbonWorks]

[/quote]

Does the Garmin 1030 fit the entire length of the THM mount?
[/quote]

Yes of course you can use the big computers like Garmin 1030!
It is also possible to have them with a special length on demand.
Of course this will take some time for production.

[neohp]

Hello carbon.

Can't find the ref for the extralite gps mount on your website.
Do you have a link ?

Best

[moyboy]

Same here,

Is it a mount for M4 bolts? as that's what they use.

Hello carbon.

Can't find the ref for the extralite gps mount on your website.
Do you have a link ?

Best

[CarbonWorks]

The mount for extralite is not finished yet.
But we will have a great mount for extralite in the near future.

[neohp]

Sounds good.
Eagerly waiting for it !
Thanks

[Mep]

I'm interested to see what the Extralite mount looks like as well. The CH-01 looks less clean than I would have liked.

[VTR1000SP2]

Would you say that the MasterMount and the solution for integrated bars are the only 2 available with angle adjustment?


Sent from my iPhone using Tapatalk

[CarbonWorks]

Would you say that the MasterMount and the solution for integrated bars are the only 2 available with angle adjustment?

Thank you for your question!

The angle adjustment is possible for:
THM Tibia mount,
Darimo Mount,
MCFK Mount,
MasterMount,
CockpitMount,
CockpitMount-straight,
Integralmount-multifunctional

[VTR1000SP2]

Well done!


Sent from my iPhone using Tapatalk

[mendiz]

Hello, @CarbonWorks, and for AX Lightness Rigid stem?

[takashi24]

Yes of course you can use the big computers like Garmin 1030!
It is also possible to have them with a special length on demand.
Of course this will take some time for production.

Hi CarbonWorks,

For the "special length on demand"; how do I order? My LBS is one of your reseller. So I just have to tell them my computer is Garmin 530 and you guys at CarbonWorks know what the perfect length right?

Because Garmin 530 just a small device; it will look so odd if I put on the standard length with so much sticking out from the stem and besides it much heavy. LOL

Kindly advice. Thanks.

[NiFTY]

How is the angle adjustable for the mcfk?

[CarbonWorks]

Hello again ,
many of you asked so many questions, so I decided to start a youtube channel.
Would be great if you support with likes and follow . I will try to answer all important questions there soon.


https://youtu.be/INgLeMfFtWE

[CarbonWorks]

[Kazyole]

Just to add, a couple shots of my bike's front end since my new parts came in. Darimo IX2/Ellipse bars with the Carbonworks Darimo mount:



And from above:




It's an incredibly clean setup and I'm extremely happy with it. For a rider like me, it's probably the closest I'll ever get to a fully integrated cockpit with my proportions being what they are. I need a 38cm bar and a 120mm stem, so there aren't a lot of options out there. The IX2/Ellipse combo is already a very tidy bar/stem combo with only the two bolts up front. Integrating the mount directly off those bolts is genius. Keeps my wahoo at the perfect level relative to the stem and basically visually eliminates the interface between the stem and bars. The finishing of the carbonworks mount also perfectly matches my 3K glossy Darimo parts, which is a nice added bonus. You'd never know it wasn't all made by one manufacturer just looking at it. It's fantastic work, and I'd highly recommend picking one up to anyone considering it. One of those really nice little touches you can do that really sets off your WW build.

Whenever you get around to making the aero wahoo elemnt bolt module, put me down for one.