Are We Getting A New Cannondale Supersix?

[Dan Gerous]

Custom painted, built by Stage21, looks pretty nice:

[Wenne]

[S6ED]

Custom painted, built by Stage21, looks pretty nice:

Nice but voiding the warranty is a no go for me.

[Wenne]

FSA -12

[brearley]

Is there a lighter solution to pf30a bottom bracket than the token ninja setup?
As they all seem to screw together I'm thinking none are going to be sub 100g and I'd consider full ceramic replacements to the bearings to drop weight further

[hernejj]

Is there a lighter solution to pf30a bottom bracket than the token ninja setup?
As they all seem to screw together I'm thinking none are going to be sub 100g and I'd consider full ceramic replacements to the bearings to drop weight further

I guess it depends on what cranks you're planning on using. But here are the ones I know about:
https://wheelsmfg.com/bottom-brackets/c ... pf30a.html
https://www.c-bear.com/en/products/pf30a
https://www.bbinfinite.com/products/osb ... 9864585539

[N1720]

@Wenne what's the weight of your bike? Did you use full-length housing for the shift cables or did you use cable stops inside the downtube? Is the shifting quality as good as it is normally?

[Dan Gerous]

Aren't the stock Cannondale alloy PF30 cups much lighter than all these? I never had any issues with them.

[Wenne]

@Wenne what's the weight of your bike? Did you use full-length housing for the shift cables or did you use cable stops inside the downtube? Is the shifting quality as good as it is normally?

full-length housing for the shift cables ! 8,1 kg...

[Wenne]

@Wenne what's the weight of your bike? Did you use full-length housing for the shift cables or did you use cable stops inside the downtube? Is the shifting quality as good as it is normally?

shifting quality good...
bike size 54 with body size 170

[S6ED]

Aren't the stock Cannondale alloy PF30 cups much lighter than all these? I never had any issues with them.

This must indeed be the lightest option. The stock aluminium cups are very light, my bike (Evo2) came with these plus a plastic FSA sleeve (10g or so) between them that insulates the BB axle from the elements. The plastic sleeve can be removed, if one so wishes, but its good to keep it as it keeps the whole BB assembly clean and dry.

[S6ED]

...

[alexneumuller]

Back from the Painter. Frame weight is 830grs after repaint in a size 56

The frame was without fork es 870gr with two small pieces of card board and some clear protector wrapping g. So probably around 850gr.

Will weigh frame and fork when I get it back.

Painted or raw frame before painting it?

I saw it in fatcreation Instagram, really nive


Sent from my iPhone using Tapatalk

Envoyé de mon iPhone en utilisant Tapatalk[/quote]



Sent from my iPhone using Tapatalk

[alexneumuller]

One piece BB would work. The piece inside is the rubber tube

Will check and take picture when the frame is back with me. Should be Thursday or Friday

Can we get more detail from the bottom bracket area, is the opening completely free from obtrusion? Can we put a one-piece bottom bracket in that?

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

[Wenne]

Still waiting on my ship to get a 51 and a 54 in to try . I’m wondering what a 54 with a saddle height of 69.5cm from bb will look like . I’m 5ft 8 . The shop had a caad13 in 51 in . Guy told me I’d be a 54 but I’m not so sure

Frame 54 , 69,5cm from bb...