FM109 TT Frame Campagnolo Mechanical

[DJT21]

Your saddle looks too high in that video!

[none]

That's a fancy setup for bike fitting..

[skidrrr]

Your saddle looks too high in that video!

Thanks for noticing me DJT21
I see that my stibones are slithly moving here on this vid but I'm not concerned. This shot was made somewhere in the middle.

That's a fancy setup for bike fitting..

This machine is called DFU and it moves just like T-800

[skidrrr]

Just got a pair of Chinese Wheels from Ali.

Rim height: 60mm
Rim width: 26mm
Type: Tubeless clinchers
Hubs: Campy10/11s R36 hubs with ceramic bearings
Brake track: AC3 (replica)
Spokes: 20/24

[none]

^^^
What do the nipple holes look like for them tubeless clincher rims?

[skidrrr]

I'm sorry I can't really comment on nipple holes. I mean holes are defenitely there. It doesn't look like Campagnolo's Bora rims when there are no outer holes on tire bed.
But this set came with tubeless tape installed and I don't want to uninstall it unless it will leak during tubeless setup.

[knightskid]

What is the internal width of the rim? And is it possible to have your aliexpress link? Thanks.

[skidrrr]

What is the internal width of the rim? And is it possible to have your aliexpress link? Thanks.

Sure here is the link.
I will measure internal width tomorrow. Conform the description it should be somewhere between 18-19mm.
P.S. I like your username

[skidrrr]

The internal width measures 17mm

[knightskid]

The internal width measures 17mm

Thanks for the link and the measurement.....i shall look up at the sites to see they have any 19mm to 21mm internal width with around 60mm deep wheel. Been wanted to get from lightbicycles but their 56mm deep wheel is 30mm width which i am not interested....

[skidrrr]

This project is finally done

[alanyu]

I think your wheel is non-backhole TL type, because the red rim tape seems like clincher tape, not tubeless tape.

[skidrrr]

I think your wheel is non-backhole TL type, because the red rim tape seems like clincher tape, not tubeless tape.

You could be right about that tape. This time I mounted clincher Conti 5000 not a TL version since I didn't buy vavle and orange seal yeat.
Thanks I'll add tubeless tape to my shopping list just in case.

[SandwichNP]

This project is finally done

How did you end up getting along with this frame ? I'm thinking about building one up. I am no stranger to Ali baba nor dealing with little build up issues either. Just want to know if the juice is worth the squeeze