Looks good, enjoy!DaiD wrote: ↑Thu Jul 18, 2019 10:49 amThanks for your kind comments guys .
I wouldn't have a clue regarding integrating the cables I'm afraid. Someone mentioned an FSA headset earlier in this thread that might help, and I'm sure solutions would be more easily found by going for the framset-only/buy a 105 SS and dismantle it approach.
It's a size 54, and it's a -17 degree, 120mm stem. I'll be changing it eventually for the same size but matching Zipp stem [this one's a Specialized, which actually adds another couple mm to the stack]
Clearance-wise, it's supposed to go up to 30mm, but I reckon it can go bigger [not that I'd run anything over 25mm, most likely]. The tyres are 23mm, stretched on those rims to 24.5mm and sit nicely just inside the width of the rim #aero! The 25mm it came with were actually nicer-feeling, and were stretched to 26.5mm.
Just had the DA cassette delivered - quickly weighed it at 208g including lockring. Took off the 105 cassette and that's 'only' 306g! So not quite as much saving as initially thought. He giveth with one hand and taketh away with another!
What is the height (thickness) of this head tube top cap?
Is that a thin spacer between top cap and stem?