Allez sprint disc

Discuss light weight issues concerning road bikes & parts.
Schadenfreude
Posts: 39
Joined: Sun Feb 10, 2019 10:47 pm

by Schadenfreude

Thanks Kesselflicker and Hexsense for the info about di2 cable routing. It looks as though the hydraulic hose for the rear brake exits the frame from much closer to the BB?

Also Hexsense: I assume that's a case for spares under your bottle cages? Do you mind sharing what it is?

Hexsense
Posts: 933
Joined: Wed Dec 30, 2015 12:41 am

by Hexsense

It's a bodge. :lol:
Topeak Ninja pouch (mountain bike version for larger storage).
And Elite Cannibal bottle cage.

However, there is not enough space for conveniently use big bottle while having the storage on this size 49 bike. So i cut bottom part of the bottle cage out and use pivot stand of the storage to support the bottle instead. See the picture for what I mean.
20190514_205805.jpg
Storage can hold one tube, one tire lever, a co2 canister and head.

There is also Topeak Ninja pouch+, which is bottle cage and storage integrated together.

by Weenie


Schadenfreude
Posts: 39
Joined: Sun Feb 10, 2019 10:47 pm

by Schadenfreude

Hexsense wrote:
Wed May 15, 2019 3:04 am
It's a bodge. :lol:
Topeak Ninja pouch (mountain bike version for larger storage).
Awesome, thanks!

Helmetbox
Posts: 45
Joined: Wed Mar 23, 2016 5:14 pm

by Helmetbox

Hello peeps, those running on di2, how do you guys covered the holes below the bottom bracket to prevent water from reach your junction b?

https://www.photobox.co.uk/my/photo/ful ... 1869544887

User avatar
rainerhq
Posts: 840
Joined: Wed Dec 15, 2010 10:32 am
Location: Estonia

by rainerhq

Bit confused about the BB dimensions.
Bike24 says 61x46, but the frame measures 68mm.
There are 2 different Praxis Works BBs available: 61,5 and 68.

https://www.bike24.com/p2297854.html?q=allez

Praxis Works
https://www.bike24.com/1.php?content=8; ... 5B879%5D=1
https://www.bike24.com/1.php?content=8; ... D=1;page=2

Which do I need?
Domane
Speed Concept
"Nothing compares to the simple pleasure of a bike ride"

User avatar
Calnago
Posts: 8530
Joined: Sun Nov 07, 2010 9:14 pm

by Calnago

If your frame has a 68mm shell you need the praxis BB for the 68mm shell. The ~61mm shell was the “old” OSBB dimension and was a very poor design choice. Narrower was not the way to go. I’m not sure, but I doubt if any of their newer models use it anymore.
Colnago C64 - The Naked Build; Colnago C60 - PR99; Trek Koppenberg - Where Emonda and Domane Meet;
Unlinked Builds (searchable): Colnago C59 - 5 Years Later; Trek Emonda SL Campagnolo SR; Special Colnago EPQ

Helmetbox
Posts: 45
Joined: Wed Mar 23, 2016 5:14 pm

by Helmetbox

rainerhq wrote:
Tue May 21, 2019 4:12 pm
Bit confused about the BB dimensions.
Bike24 says 61x46, but the frame measures 68mm.
There are 2 different Praxis Works BBs available: 61,5 and 68.

https://www.bike24.com/p2297854.html?q=allez

Praxis Works
https://www.bike24.com/1.php?content=8; ... 5B879%5D=1
https://www.bike24.com/1.php?content=8; ... D=1;page=2

Which do I need?

I have been using wheel mfg adapter for all my specialized bikes if they were on shimano crank.

https://www.bike24.com/p2219733.html

Work extremely fine for me. However, if possible get a bb30 crank, felt much better with a bb30 cranks.

User avatar
rainerhq
Posts: 840
Joined: Wed Dec 15, 2010 10:32 am
Location: Estonia

by rainerhq

Adapters were out of stock. I ordered the KCNC BB. Almost like Praxis.
Domane
Speed Concept
"Nothing compares to the simple pleasure of a bike ride"

Helmetbox
Posts: 45
Joined: Wed Mar 23, 2016 5:14 pm

by Helmetbox

Helmetbox wrote:
Sat May 18, 2019 7:14 am
Hello peeps, those running on di2, how do you guys covered the holes below the bottom bracket to prevent water from reach your junction b?

https://www.photobox.co.uk/my/photo/ful ... 1869544887
:up:

Peter_E
Posts: 419
Joined: Sun Jul 22, 2007 1:39 pm

by Peter_E

Just got mine. Sagan edition (overxposed) in size 54. Build is Sram Red (older S-700 shifters) with Force brakes. Fulcrum Quattro carbon wheels with 28mm Vittoria Corsa G. 7.66 kg as pictured so not too bad. Done one short ride on it but so far so good. Feels fast. Paintwork is (a lot) nicer in real life, at least to me.
Alezdisc3 - kopia.JPG
Allezdisc4 (2) - kopia.jpg

07stuntin6r
Posts: 196
Joined: Mon Aug 08, 2016 2:09 am

by 07stuntin6r

Peter_E wrote:Just got mine. Sagan edition (overxposed) in size 54. Build is Sram Red (older S-700 shifters) with Force brakes. Fulcrum Quattro carbon wheels with 28mm Vittoria Corsa G. 7.66 kg as pictured so not too bad. Done one short ride on it but so far so good. Feels fast. Paintwork is (a lot) nicer in real life, at least to me.
Alezdisc3 - kopia.JPG
Allezdisc4 (2) - kopia.jpg
Love that color way so clean!


Sent from my iPhone using Tapatalk

Helmetbox
Posts: 45
Joined: Wed Mar 23, 2016 5:14 pm

by Helmetbox

Nobody uses di2 for disc allez?

Hexsense
Posts: 933
Joined: Wed Dec 30, 2015 12:41 am

by Hexsense

Helmetbox wrote:
Tue Jun 18, 2019 11:42 am
Nobody uses di2 for disc allez?
Are you blind?
Go back one page, my bike and many others are set up with di2 :roll:

Helmetbox
Posts: 45
Joined: Wed Mar 23, 2016 5:14 pm

by Helmetbox

Hexsense wrote:
Tue Jun 18, 2019 1:32 pm
Helmetbox wrote:
Tue Jun 18, 2019 11:42 am
Nobody uses di2 for disc allez?
Are you blind?
Go back one page, my bike and many others are set up with di2 :roll:
I am asking how do they cover the bottom bracket area to prevent water from reaching the junction b, but seem that nobody reply.

by Weenie


blehargh
Posts: 42
Joined: Thu Aug 09, 2018 8:08 pm

by blehargh

Can you post another photo? Curious about how the bottom bracket area cable routing works. The link doesn’t work for me. Thanks!

Post Reply
  • Similar Topics
    Replies
    Views
    Last post