2019 S-Works Tarmac SL6 Disc (6,900g)

Who are you (no off-topic talk please)

Moderator: Moderator Team

Post Reply
tonytourist
Posts: 1285
Joined: Sat Oct 10, 2009 7:13 am
Location: 93306

by tonytourist

My wheel changes have been easy with both the standard and direct mount hanger.

User avatar
Calnago
Posts: 8150
Joined: Sun Nov 07, 2010 9:14 pm

by Calnago

^ Then your frame doesn't have the issue in the first place. And that's exactly what I would expect... wheel removal should be the same with either DM or STD mount hangers, so long as the derailluers end up in the same place. And if your wheel was difficult to remove with the standard hanger and b-link, then it will be difficult with a DM hanger as well. Unless mods were made with with initial setup (which is possible and easy) or the DM hanger was designed to take that particular frame's peculiarities into account, and positions the derailleur slightly outside of Shimanos specs to accommodate it.
Colnago C64 - The Naked Build; Colnago C60 - PR99; Trek Koppenberg - Where Emonda and Domane Meet;
Unlinked Builds (searchable): Colnago C59 - 5 Years Later; Trek Emonda SL Campagnolo SR; Special Colnago EPQ

by Weenie


tonytourist
Posts: 1285
Joined: Sat Oct 10, 2009 7:13 am
Location: 93306

by tonytourist

I have the exact same bike as Rich, I'm not pdlpshr :roll: :roll:

User avatar
Calnago
Posts: 8150
Joined: Sun Nov 07, 2010 9:14 pm

by Calnago

Yes... I realize that. So...?
Colnago C64 - The Naked Build; Colnago C60 - PR99; Trek Koppenberg - Where Emonda and Domane Meet;
Unlinked Builds (searchable): Colnago C59 - 5 Years Later; Trek Emonda SL Campagnolo SR; Special Colnago EPQ


gurk700
Posts: 239
Joined: Fri Jan 20, 2017 7:40 pm

by gurk700

HOT. (but i'm partial to SL6 :P )
are those 28mm turbo cottons or 26mm?

I've been running 24mm Veloflex and 26mm Turbos.
Wanna also try turbo cottons. Can't decide if I should get 26 or 28.

User avatar
Rich_W
Posts: 1968
Joined: Sat Dec 11, 2004 1:31 pm
Location: LBI

by Rich_W

26 turbo cotton. Measure 27.9mm on CLX50s

Jorisvc
Posts: 8
Joined: Wed May 03, 2017 10:31 pm

by Jorisvc

Hi Rich,

Are you using cups on the original ceramicspeeds to fit the r9100?
No cracks?

Grtz

User avatar
Rich_W
Posts: 1968
Joined: Sat Dec 11, 2004 1:31 pm
Location: LBI

by Rich_W

Jorisvc wrote:
Wed Apr 24, 2019 2:01 am
Hi Rich,

Are you using cups on the original ceramicspeeds to fit the r9100?
No cracks?

Grtz
No, adapter cups are doo-doo. Using a proper Ceramic Speed BB30 Shimano Road Insert.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post