2018 Tarmac S works SL6 - Dura Ace 9100 Cranks Compatibility

Discuss light weight issues concerning road bikes & parts.
juang1985
Posts: 9
Joined: Fri Dec 21, 2018 3:00 am

by juang1985

Hello Everyone

First time posting long time follower.

I am a total noob when it comes to bottom brackets.( now that I got that out of the way)

I am about to complete the parts list for my new build a SL6 Sworks tarmac, I decided to go with the Dura ace Di2 9150 groupset.

the dura ace 9100 crankset is 24mm diameter spindle, I want to know the best way to make it work with my frame I think is BB30 (could be wrong)

Anyone out there knows the compatibility of the Tarmac SL6 and the Dura Ace 9100 Cranks?

I attached a picture of the bottom bracket area of my Frameset any help of the parts that I will need would be greatly appriciated.

Thanks!
Attachments
20181231_210701.jpg
Last edited by juang1985 on Wed Jan 16, 2019 6:34 am, edited 2 times in total.

spdntrxi
Posts: 3128
Joined: Sat Jul 20, 2013 6:11 pm

by spdntrxi

your BB is already there... cant tell the size obviously, but you can get some calipers and measure. The diameter does not look particular large to my eyes... it might be 24 already. Do you know what crank was in there before ?

by Weenie


juang1985
Posts: 9
Joined: Fri Dec 21, 2018 3:00 am

by juang1985

spdntrxi wrote:
Wed Jan 16, 2019 6:03 am
your BB is already there... cant tell the size obviously, but you can get some calipers and measure. The diameter does not look particular large to my eyes... it might be 24 already. Do you know what crank was in there before ?
Thanks for your reply, I tried to inert the crankset in there and there is lots of play it has to be 30mm vs 24mm dura ace crank

I dont know what crankset was there, I would assume the Sworks crankset possibly.

spdntrxi
Posts: 3128
Joined: Sat Jul 20, 2013 6:11 pm

by spdntrxi

juang1985 wrote:
Wed Jan 16, 2019 6:15 am
spdntrxi wrote:
Wed Jan 16, 2019 6:03 am
your BB is already there... cant tell the size obviously, but you can get some calipers and measure. The diameter does not look particular large to my eyes... it might be 24 already. Do you know what crank was in there before ?
Thanks for your reply, I tried to inert the crankset in there and there is lots of play it has to be 30mm vs 24mm dura ace crank

I dont know what crankset was there, I would assume the Sworks crankset possibly.
lots of play then it was probably was a 30mm sworks crank.. too bad you have a nice ceramicspeed BB in there already.

juang1985
Posts: 9
Joined: Fri Dec 21, 2018 3:00 am

by juang1985

spdntrxi wrote:
Wed Jan 16, 2019 6:19 am
juang1985 wrote:
Wed Jan 16, 2019 6:15 am
spdntrxi wrote:
Wed Jan 16, 2019 6:03 am
your BB is already there... cant tell the size obviously, but you can get some calipers and measure. The diameter does not look particular large to my eyes... it might be 24 already. Do you know what crank was in there before ?
Thanks for your reply, I tried to inert the crankset in there and there is lots of play it has to be 30mm vs 24mm dura ace crank

I dont know what crankset was there, I would assume the Sworks crankset possibly.
lots of play then it was probably was a 30mm sworks crank.. too bad you have a nice ceramicspeed BB in there already.

Yes this gotta be 30mm and the Cranks are 24mm.

so would this fix my issue?

I am just a bit lost, not sure what bottom bracket to buy

https://www.amazon.com/CeramicSpeed-BB3 ... ref=sr_1_2

User avatar
cyclespeed
Posts: 642
Joined: Mon Jun 06, 2016 8:45 am

by cyclespeed

I wish people would stop calling it a 'BB'. It´s not, it's just 2 bearings inserted into the frame.

The standard set up for an SL5 or SL6 Tarmac is 2 bearings pressed into the frame. With internal diameter of 30mm.

The Sworks crankset just slips straight in with a bearing shield either side and an adjustable spacer.

To fit a 24mm axle like the Dura Ace you need an adaptor that slides into the current bearing and reduces it to 24mm.

L3X
Posts: 342
Joined: Wed Feb 25, 2009 8:39 pm

by L3X

Cyclespeed is right, by default this frame comes with CeramicSpeed bearings for OSBB.

User avatar
VTR1000SP2
Posts: 782
Joined: Tue Nov 05, 2013 8:21 pm

by VTR1000SP2

Take it to a shop, have them order and install the correct part for your configuration.


Sent from my iPhone using Tapatalk

User avatar
cyclespeed
Posts: 642
Joined: Mon Jun 06, 2016 8:45 am

by cyclespeed

VTR1000SP2 wrote:
Wed Jan 16, 2019 12:13 pm
Take it to a shop, have them order and install the correct part for your configuration.


Sent from my iPhone using Tapatalk
Good luck with that, my LBS didn´t have a clue and gave me a ROTOR Aldhu with an axle that was way too long.
They then got me a SRAM Red and installed it wrong.
Better to sort these things out yourself IME.

User avatar
VTR1000SP2
Posts: 782
Joined: Tue Nov 05, 2013 8:21 pm

by VTR1000SP2

cyclespeed wrote:
VTR1000SP2 wrote:
Wed Jan 16, 2019 12:13 pm
Take it to a shop, have them order and install the correct part for your configuration.


Sent from my iPhone using Tapatalk
Good luck with that, my LBS didn´t have a clue and gave me a ROTOR Aldhu with an axle that was way too long.
They then got me a SRAM Red and installed it wrong.
Better to sort these things out yourself IME.
I’m sure there are competent mechanics out there. Just gotta find them.


Sent from my iPhone using Tapatalk

liam7020
Posts: 1001
Joined: Tue Jul 27, 2010 10:04 am

by liam7020

L3X wrote:
Wed Jan 16, 2019 11:14 am
Cyclespeed is right, by default this frame comes with CeramicSpeed bearings for OSBB.
cyclespeed wrote:
Wed Jan 16, 2019 9:32 am
I wish people would stop calling it a 'BB'. It´s not, it's just 2 bearings inserted into the frame.
No offence but you're wrong, it's a bottom bracket - OSBB=OverSizedBottomBracket. OSBB is Specialized's version of BB30. Would someone care to hazard a guess what the BB stands for in BB30? On the Ceramic Speed website the OSBB bearings are listed under the section marked bottom bracket and whilst it may not be the fondly remembered BSA threaded bottom bracket, a bottom bracket it is nonetheless. Would someone care to put a name to that area of the frame where the OSBB/BB30/PF30/BB86/BSA/386EVO/PF41 all press/insert/thread into? Let me see now - oh yes that would be the bottom bracket!!!
Tarmac SL6 & Campag Record EPS https://weightweenies.starbike.com/foru ... 0&t=153968

"Sometimes you don't need a plan. You just need big balls." Tom Boonen

juang1985
Posts: 9
Joined: Fri Dec 21, 2018 3:00 am

by juang1985

cyclespeed wrote:
Wed Jan 16, 2019 9:32 am
I wish people would stop calling it a 'BB'. It´s not, it's just 2 bearings inserted into the frame.

The standard set up for an SL5 or SL6 Tarmac is 2 bearings pressed into the frame. With internal diameter of 30mm.

The Sworks crankset just slips straight in with a bearing shield either side and an adjustable spacer.

To fit a 24mm axle like the Dura Ace you need an adaptor that slides into the current bearing and reduces it to 24mm.
Thank you all for your replies.

Would the adapters work well or would something like this be better?

https://praxiscycles.com/product/shimano-conversion-bb/

Or this


https://www.endurobearingsonline.com/products/bb30-24

So many options want to install the best possible option

User avatar
cyclespeed
Posts: 642
Joined: Mon Jun 06, 2016 8:45 am

by cyclespeed

liam7020 wrote:
Wed Jan 16, 2019 12:38 pm
L3X wrote:
Wed Jan 16, 2019 11:14 am
Cyclespeed is right, by default this frame comes with CeramicSpeed bearings for OSBB.
cyclespeed wrote:
Wed Jan 16, 2019 9:32 am
I wish people would stop calling it a 'BB'. It´s not, it's just 2 bearings inserted into the frame.
No offence but you're wrong, it's a bottom bracket - OSBB=OverSizedBottomBracket. OSBB is Specialized's version of BB30. Would someone care to hazard a guess what the BB stands for in BB30? On the Ceramic Speed website the OSBB bearings are listed under the section marked bottom bracket and whilst it may not be the fondly remembered BSA threaded bottom bracket, a bottom bracket it is nonetheless. Would someone care to put a name to that area of the frame where the OSBB/BB30/PF30/BB86/BSA/386EVO/PF41 all press/insert/thread into? Let me see now - oh yes that would be the bottom bracket!!!
They can call it what they like, but it doesn´t change the fact that it´s just 2 bearings. I wouldn´t call that a BB personally.
For me, a BB is a piece that contains cups, sleeves, bearings and threaded inserts. You can´t 'buy' a Specialized BB, you can just buy the bearings……

liam7020
Posts: 1001
Joined: Tue Jul 27, 2010 10:04 am

by liam7020

And yet when I took delivery of my SL6 the CeramicSpeed box containing the bearings etc was clearly marked "bottom bracket".
Tarmac SL6 & Campag Record EPS https://weightweenies.starbike.com/foru ... 0&t=153968

"Sometimes you don't need a plan. You just need big balls." Tom Boonen

by Weenie


juang1985
Posts: 9
Joined: Fri Dec 21, 2018 3:00 am

by juang1985

Guys,

Bottom bracket or bearings just let it be. I agree with both of you, it does not look like a bottom bracket it looks like a pair of bearings but They do call it a bottom bracket.

Have any if you heard or tried any of these two?

Thank you all for your replies. 

https://praxiscycles.com/product/shimano-conversion-bb/

Or this


https://www.endurobearingsonline.com/products/bb30-24


I want the best permanent option for this build, please advice
Last edited by juang1985 on Wed Jan 16, 2019 4:15 pm, edited 1 time in total.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post