5,474 Supersix Black Inc 2013

Who are you (no off-topic talk please)

Moderator: Moderator Team

Darmen
Posts: 35
Joined: Mon Jun 11, 2018 1:54 am

by Darmen

Hi weightweenies

Hereis the build list for my 5,474 Supersix Black Inc 2013
Build List updated.jpg
Actual Weight
IMG-1836 (1).JPG
Last edited by Darmen on Wed Jan 16, 2019 4:23 am, edited 7 times in total.

by Weenie


NiFTY
Posts: 1320
Joined: Sat May 26, 2012 11:26 pm

by NiFTY

Pictures. Hows the front shifting w da? Any rubbing( as you can't trim)
Evo 4.9kg SL3 6.64kg Slice RS 8.89kg viewtopic.php?f=10&t=110579" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

Darmen
Posts: 35
Joined: Mon Jun 11, 2018 1:54 am

by Darmen

Hereis the parts weight
IMG-0240.jpg
the handle bar is little bit like aeronova handle bar, and nice suspension size 400 90
IMG-0523.JPG
this titanium qr is light and so handy, but i think i need to replace it with lighter qr
IMG-1767.JPG
standard headset with 1 cm dust cap, try to reduce 20g, FSA SL headset is on the way :D hopefully save 20g
IMG-1768.JPG
standard fork cut until no spacer
IMG-1769.JPG
Frame size 52 include PF30 Bottom Bracket
IMG-1772.JPG
Extralite expander + absolute black top cap, save about 6g of the original si, extralite expander is little bit hard to install, i had to move rubber seal into the middle of expander and it works.
IMG-1773.JPG
Dura ace 9000 FD with farnear bolt
IMG-1789.JPG
XG1190 cassette 11-28, i had to remove the seal to save about 6g
IMG-1802.JPG
hereis trickiest part. i really want to use PF30 BB couple it with my Easton crank which original have 129mm spindle. to make it works i had to bought 104mm spinde and make some spacer using carbon steerer spacer.
IMG-1805.JPG
i cut the seatpost to my size + 10cm minimum insert

Darmen
Posts: 35
Joined: Mon Jun 11, 2018 1:54 am

by Darmen

NiFTY wrote:
Mon Jan 14, 2019 5:00 am
Pictures. Hows the front shifting w da? Any rubbing( as you can't trim)
Hi its updated, yes its rubb a lot if cross chainring :)

Darmen
Posts: 35
Joined: Mon Jun 11, 2018 1:54 am

by Darmen

IMG-1792.JPG
KMC X11SL
IMG-1796.JPG
Born as Look Keo Blade 2 with Cr shaft. got upgraded to Ti shaft.
IMG-1809.JPG
Standard Seatclamp from cannondale, weight 16g
IMG-1814.JPG
KCNC CB3 + Corima Brake Pads 168g. its lighter than ee brake
IMG-7756.JPG
custom wheelset G3 pattern straightpull R36 rim 50mm total weight 1365 (excl qr)
IMG-1815.JPG
Barfly Mini. Garmin & Gopro in harmony. but weight ore than i expected
IMG-1818.JPG
Skully light

Darmen
Posts: 35
Joined: Mon Jun 11, 2018 1:54 am

by Darmen

Image

allhill
Posts: 6
Joined: Mon Feb 05, 2018 2:41 pm

by allhill

nice bike!
where you get your wheelset? 50mm profile with below 1.5kg is awesome.

User avatar
nickf
Posts: 822
Joined: Sat Mar 06, 2010 10:34 pm

by nickf

Nice build.

Seatpost clamp you can save a little. Worked great on my 2015 Evo hm. 9g.

https://rover.ebay.com/rover/0/0/0?mpre ... 0957470489

User avatar
prebsy
Posts: 875
Joined: Tue Oct 23, 2012 10:52 pm
Location: PHL

by prebsy

Darmen wrote:
NiFTY wrote:
Mon Jan 14, 2019 5:00 am
Pictures. Hows the front shifting w da? Any rubbing( as you can't trim)
Hi its updated, yes its rubb a lot if cross chainring :)
Feels like it would be worth the weight penalty to have the yaw FD. You could definitely save a bunch on the skewers some Ti bolt ons from eBay are my go to. Super clean , cheap and < 30g

Sent from my Pixel XL using Tapatalk


Darmen
Posts: 35
Joined: Mon Jun 11, 2018 1:54 am

by Darmen

allhill wrote:
Wed Jan 16, 2019 10:48 am
nice bike!
where you get your wheelset? 50mm profile with below 1.5kg is awesome.
I bought it on aliexpress it cost less than $500 (excl tax) about 2 years ago. it has 20.5mm width and fit perfect with my 20mm tires.

But now they even sell lighter wheels, weight less than 1.1kg for 50mm profile :shock:

Darmen
Posts: 35
Joined: Mon Jun 11, 2018 1:54 am

by Darmen

nickf wrote:
Wed Jan 16, 2019 1:35 pm
Nice build.

Seatpost clamp you can save a little. Worked great on my 2015 Evo hm. 9g.

https://rover.ebay.com/rover/0/0/0?mpre ... 0957470489
Nice. i've been planning to buy lighter clamp. but still cant decide whether darimo sub4 or yuniper 6g. Altough, still doubt the performance

Darmen
Posts: 35
Joined: Mon Jun 11, 2018 1:54 am

by Darmen

prebsy wrote:
Wed Jan 16, 2019 2:50 pm
Darmen wrote:
NiFTY wrote:
Mon Jan 14, 2019 5:00 am
Pictures. Hows the front shifting w da? Any rubbing( as you can't trim)
Hi its updated, yes its rubb a lot if cross chainring :)
Feels like it would be worth the weight penalty to have the yaw FD. You could definitely save a bunch on the skewers some Ti bolt ons from eBay are my go to. Super clean , cheap and < 30g

Sent from my Pixel XL using Tapatalk
The main reason i use DA front derailleur is due to my oval chainring. based on some forums Red FD doesnt shift well with oval chainring, they tend to over shift cause chain drop to the crank.

until now DA front derailleur shift well with my oval chainring, just rub issues if i use cross chainring configuration.

but if changing bolt can save Red FD by 30g, i tempted to using Red FD :twisted:

Darmen
Posts: 35
Joined: Mon Jun 11, 2018 1:54 am

by Darmen

IMG-1859.JPG
The original headset dust cap spacer weight 15g for 15mm height, then i remember i have a spare 10 mm dust cap weight 10g and a 10mm carbon spacer weight 3g. Saving 2 gram sounds good. when i install the spare dust cap there is a gap to frame, i have to sand the dust cap until no gap and reduce carbon spacer height to 5mm. it turn out the dust cap and carbon spacer now only weight 9g.
IMG-1855.JPG
ive purchase rockbross garmin mount, weight half barfly, only 22g but i doubt its rigidity

IMG-1840.JPG
Update weight list

Frame Supersix Black Inc 2013 (705g)
Fork Supersix Black Inc 2013 (282g)
Topcap AbsoluteBlack + Expander Extralite ultrastar 3 (10g)
Headset Supersix (49g)
Headset spacer and dust cap (9g)
Integrated Dropbar RXL (320g)
Bartape Lizard Skin 1.8mm (50g)
Shifter Sram Red (300g)
Front Deraileur Dura Ace 9000 Farnear bolt (60g)
Rear Deraileur Sram Red 22 Carbon Pulley and Inner Cage (130g)
Bottom Bracket Sram Ceramic PF30 (82g)
Spacer + Seal (6g)
Cranks Easton EC 90 (402g)
Chainring Carbon Ti X cam 50T (80g)
Chainring Carbon Ti X cam 36T (31g)
Chainring Bolt Easton EC 90 (5g)
Cassette Sram RED 22 11-28 rubber less (159g)
Chain KMC SL (221g)
Brake KCNC CB3 with Corima pads (168g)
Seatpost NV 22cm (104g)
Seat Clamp Cannondale 30.00mm (16g)
Saddle Astute skylite VT (173g)
Alligator iLink Shifter and Brake (85g)
Front Wheelset Powerway 36 50mm 18 H (615g)
Rear Wheelset Powerway 36 50mm 21 H (745g)
Front Tire Tufo Elite Jet (160g)
Rear Tire Tufo Elite Jet (160g)
Air and Glue (9g)
QR Titanium (49g)
Pedal Look Keo Blade 2 Ti (192g)
Electronic Garmin Sensor (27g)
Garmin Mounting Rock Bros (22g)
Light Skully (14g)

Total 5440g

User avatar
Klaster_1
Posts: 775
Joined: Mon Aug 15, 2016 10:25 am
Location: Russia

by Klaster_1

Darmen wrote:
Mon Jan 14, 2019 5:39 am
IMG-1789.JPG XG1190 cassette 11-28, i had to remove the seal to save about 6g
How's shifting without rubber bands? Was loudness the only thing affected?

by Weenie


rexyi1990
Posts: 258
Joined: Tue Feb 20, 2018 3:05 pm

by rexyi1990

NICE BUILD

Post Reply
  • Similar Topics
    Replies
    Views
    Last post