Chinese hub reliability

Discuss light weight issues concerning road bikes & parts.
eric
Posts: 2196
Joined: Tue Nov 11, 2003 9:47 pm
Location: Santa Cruz, California, USA
Contact:

by eric

I've only seen one pair of Hubsmiths, on wheel I bought from FarSports. Based on that limited sample I'd prefer the EDhub/Bitex hubs. Their bearings are better than Hubsmith, making the hubs turn smoother. Their rear flange spacing is wider, making a laterally stiffer wheel.

6to
Posts: 12
Joined: Fri Jan 11, 2013 6:13 pm
Location: Gran Canaria

by 6to

what about circus monkey hubs? Heard they are quite good..

User avatar
rainerhq
Posts: 674
Joined: Wed Dec 15, 2010 10:32 am
Location: Estonia

by rainerhq

About circus monkey hubs...
What about these spoke holes? Sorry, don´t know a right word, but will this hub suit for radial lacing?
Attachments
circusmonketHRW.jpg
"Nothing compares to the simple pleasure of a bike ride"
Jamis Renegade Expert
Spark 900 RC

HillRPete
Posts: 2292
Joined: Tue Apr 12, 2011 8:08 am
Location: Pedal Square

by HillRPete

The "keyhole" drillings allow for wider aero spokes to be used.

Manufacturer or spec sheet should be able to tell about radial lacing compliance.

Kasparz
Posts: 609
Joined: Mon Jul 16, 2007 10:17 am
Location: Latvia

by Kasparz

Bitex and Novatec hubs are great if we exclude their generic hub range. At the moment I'm using wheelsets with DT/Corima/Mavic/Novatec/Bitex/Syncros/Shimano(various models) on my 5 bikes and Novatec/Bitec are top notch and I can not tell difference between 85$ Bitex hubs versus 500$+ DT 240's.

KLabs
Posts: 380
Joined: Wed Dec 01, 2010 4:29 am

by KLabs

They only use a 10mm axle ... do you think this is strong enough for all riders and surfaces?

User avatar
BobDopolina
Shop Owner / Manufacturer
Posts: 104
Joined: Thu Jan 24, 2013 8:48 am
Location: Taiwan
Contact:

by BobDopolina

For any of the hubs coming from Taiwanese or Chinese sources check the specs carefully. There are plenty of these hubs floating around on eBay that swap out quality bearings for lesser quality Chinese bearings. You may save $10 on the hubs only to shell out two or three times that to replace the bearings a few thousand km later.
BDop Cycling Co., Ltd.
www.bdopcycling.com

Peter_E
Posts: 409
Joined: Sun Jul 22, 2007 1:39 pm

by Peter_E

I had bad luck with the "bikelover" hubs of ebay. They use Enduro bearings but the rear still developed play really qucikly. Don't now if it was easily fixed because I replaced it w a DT240 I had. Novatec has been good as others have said.

bikeridah
Posts: 100
Joined: Sat Oct 02, 2004 2:20 am

by bikeridah

Light-bicycle has several road hub options with no additional upcharge.

I'm trying to decide between Bitex RAR9 and Novatec F582 - which would you get?

http://www.light-bicycle.com/the-more-d ... d-hub.html

eric
Posts: 2196
Joined: Tue Nov 11, 2003 9:47 pm
Location: Santa Cruz, California, USA
Contact:

by eric

The Novatec hubs weigh more (245g vs 211g) but have better DS flange spacing (18mm vs 16.5mm).

User avatar
nickf
Posts: 573
Joined: Sat Mar 06, 2010 10:34 pm

by nickf

Where can I find chosen hubs? The ones on my Williams wheels have been great. Would like to build up some 32h wheels for gravel.

velo1990
Posts: 6
Joined: Mon Jul 15, 2013 10:36 am

by velo1990

My wheels are with Novatec hubs A291-SB-SL + F482SB-SL. I have had about 500kms on it, compared my previous Bitex hubs, I like novatec better. Very smoothing. From my experience, I vote cons to Novatec. :up:
Last edited by velo1990 on Tue Aug 06, 2013 3:45 am, edited 1 time in total.

teufelhunden222
Posts: 83
Joined: Thu Jan 10, 2013 9:16 pm

by teufelhunden222

If you have any weight to ya, or push any good torque I would steerclear of the novatec.
[img]<iframe%20height='160'%20width='300'%20frameborder='0'%20allowtransparency='true'%20scrolling='no'%20src='http://app.strava.com/athletes/1677950/activity-summary/ddf436fc1ca509b20d4637cfa80c928da771d2c6'></iframe>[/img]

bikeridah
Posts: 100
Joined: Sat Oct 02, 2004 2:20 am

by bikeridah

Hmm, no glowing endorsements for either - EDhub with ceramics, final answer?

Mackers
Posts: 483
Joined: Wed Sep 05, 2007 2:02 pm

by Mackers

The Novatecs excellent.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post