SLFMotion 910 Coated Ceramic Hyper Pulleys Limited Edition 11T Black/Red

Moderator: Moderator Team

Post Reply
User avatar
poynt
Posts: 130
Joined: Sat Mar 13, 2004 5:31 pm
Location: Devon, UK

by poynt

A unused set of limited edition hyper pullies in Black Delrin with Red cover caps with coated ceramimic bearings.

These are comparable to Ceramicspeed, Kogel or C-Bear for less ££.

£100/€115 incl European Shipping paypal.




11 tooth pulley wheels for use on Road & Mtb & TT
Compatable with Shimano, Campagnolo and Sram Red Etap, Red, Force 22, Rival 22, XX, XO, X9,X7 systems.

Weight 15.5g

The pulleys spin on coated ceramic bearings with Silicon Nitride races and PTFE seals.

Image Image Image


** Note - SRAM eTap users will use STOCK silver metal spacers (will NOT use the provided SLF Motion Red plastic spacers) and will use STOCK steel bolts (SLF Motion Ti mounting bolts will NOT work with this system)
** Note - Some rear derailleurs may require longer pulley wheel bolts; our new 2017 design is approximately 8.75mm wide from outside of spacer to outside of spacer - Please see our new M5 x 15.2mm Titanium mounting bolts on our "Accessories" page **


Box contains - (2) Hyper Pulley Wheels, (4) Red Installation Spacers, (2) Extra Bearing Seals, Information/Instruction Card, and Decal Sheet

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post