700c xtr disc wheels for MTB

Especially for light weight issues concerning cyclocross / touring bikes & parts.

Moderator: Moderator Team

Locked
coach pat
Posts: 6
Joined: Sat Mar 13, 2004 4:01 pm
Location: Long Island, NY

by coach pat

I want to use my MTB as a back up cross bike and to commutte to work. I know can just put 26" slicks or 1.5s on but I would rather try 700c wheels.

Since I use disc brakes (XTR) can I just build a set of disc 700c wheels? I already have an extra set of XTR disc hubs.

I put some other 700 wheels on to check for tire clearence, which was fine, but had a problem with the spokes hitting the disc brake caliper.

Any tips? Ideally, I just swap out wheels when I want w/o adjusting the calipers or brakes.

Thanks for the help,

pat

User avatar
twistyaction usa
Posts: 456
Joined: Sun Jan 09, 2005 1:09 am
Location: Portland, OR

by twistyaction usa

Go for it. The interference between your disc caliper and your non-disc wheel spokes was because you weren't using a disc hub. I don't see why you'd have a problem otherwise as long as you've considered tire clearance. Any other questions? Repost with the results.

User avatar
Frankie - B
Administrator
Posts: 6611
Joined: Mon Jun 02, 2003 8:17 am
Location: Drenthe, Holland

by Frankie - B

Locked because of double posting. The discussion can proceed in the mtb forum.
'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'

Locked
  • Similar Topics
    Replies
    Views
    Last post