2020 Cannondale Topstone - Carbon

Especially for light weight issues concerning cyclocross / touring bikes & parts.

Moderator: Moderator Team

Hoven
Posts: 107
Joined: Mon Mar 04, 2013 7:30 am
Location: Sweden

by Hoven

Du you guys think this would work as a Cx aswell?

TurboKoo
Posts: 574
Joined: Wed Oct 29, 2008 7:55 pm

by TurboKoo

cerro wrote:TurboKoo: Size? Did you weigh the frame just?
Unfortunately I was too eager to put it together so I didn’t put it on scale.
It’s medium size.
Scott Foil
Shimano 9150
Shimano FCR-9100-P
Shimano C60 tubulars

by Weenie


TurboKoo
Posts: 574
Joined: Wed Oct 29, 2008 7:55 pm

by TurboKoo

Hoven wrote:Du you guys think this would work as a Cx aswell?
I bought it to replace my Boone and I do race CX. I have done only few rides on it but it feels good, actually rear end grip is much better. Only thing at the moment is that it feels slightly different but not in a bad way.
Scott Foil
Shimano 9150
Shimano FCR-9100-P
Shimano C60 tubulars

Hoven
Posts: 107
Joined: Mon Mar 04, 2013 7:30 am
Location: Sweden

by Hoven

TurboKoo wrote:
Thu Sep 26, 2019 2:42 am
Hoven wrote:Du you guys think this would work as a Cx aswell?
I bought it to replace my Boone and I do race CX. I have done only few rides on it but it feels good, actually rear end grip is much better. Only thing at the moment is that it feels slightly different but not in a bad way.
Sounds great! Have a pair Ai dished Cx-tubulars from my old superX I can use :D

KittenRidesBikes
Posts: 3
Joined: Fri Jun 21, 2019 3:09 am

by KittenRidesBikes

TurboKoo wrote:
Wed Sep 25, 2019 5:10 pm
ImageImageImageImageImageImage
Awesome build!

Also thinking of ordering myself one and throwing my di2 parts on there. The frame doesnt have di2 specfic routing right?

TurboKoo
Posts: 574
Joined: Wed Oct 29, 2008 7:55 pm

by TurboKoo

It’s kind of like semi supported as cables exit under bb and then are external under chainstay.
Scott Foil
Shimano 9150
Shimano FCR-9100-P
Shimano C60 tubulars

morrisond
Posts: 973
Joined: Thu Mar 25, 2004 8:34 pm

by morrisond

Do you really have to run Ai dished wheels? Those DA wheels above don't look dished.

Is this only with a 1x Crank - if you run a 2x (FSA 386EVO SL-K 46-30) can you get away with no dish?

TurboKoo
Posts: 574
Joined: Wed Oct 29, 2008 7:55 pm

by TurboKoo

I redished rear wheel on R9170C40-TL wheels. Quite easy and it probably takes 5-10 minutes.
Scott Foil
Shimano 9150
Shimano FCR-9100-P
Shimano C60 tubulars

KittenRidesBikes
Posts: 3
Joined: Fri Jun 21, 2019 3:09 am

by KittenRidesBikes

TurboKoo wrote:
Fri Nov 08, 2019 6:06 pm
I redished rear wheel on R9170C40-TL wheels. Quite easy and it probably takes 5-10 minutes.
One More Question for you bud. What bottom Bracket did you end up using to get the Shimano Cranks to work?

trex
Posts: 8
Joined: Thu Jan 18, 2018 8:42 pm
Location: Catalonia

by trex

@TurboKoo

How the heck were you able to fit Shimano crankset on 83mm BB?
I thought the only options are: Canondale cranks and Sram DUB?
TurboKoo wrote:
Wed Sep 25, 2019 5:10 pm
ImageImageImageImageImageImage

TurboKoo
Posts: 574
Joined: Wed Oct 29, 2008 7:55 pm

by TurboKoo

I’m using Shimano pressfit BB and needed to put 1mm spacer on drive side to avoid hitting crank on chainstay. NDS is really tight but removing bolts I was able to put pin down to hole and then just tightened bolts. Maybe not best solution in total but has been working whole winter. I do have GRX cranks otherwise chainring would hit frame.
Scott Foil
Shimano 9150
Shimano FCR-9100-P
Shimano C60 tubulars

Post Reply