I just bought a used focus paralane and it uses focus's proprietary RAT through axle. My problem is that the two-part nut on the rear axle stopped turning, making it impossible to tighten / loosen the pressure of the lever. The two parts seem to be stuck together very strongly.
On the same bike on the front axle, these parts are separated and the nut turns freely.
Did anyone had any issue with this? I'm feeling that I'm missing something... or did I just have a broken through axle in the rear? Thanks.
Any Focus R.A.T. users? I need some help
Moderator: Moderator Team
-
- Posts: 546
- Joined: Tue Apr 25, 2017 11:12 am
- Location: Christchurch New Zealand
nemeseri wrote:I just bought a used focus paralane and it uses focus's proprietary RAT through axle. My problem is that the two-part nut on the rear axle stopped turning, making it impossible to tighten / loosen the pressure of the lever. The two parts seem to be stuck together very strongly.
On the same bike on the front axle, these parts are separated and the nut turns freely.
Did anyone had any issue with this? I'm feeling that I'm missing something... or did I just have a broken through axle in the rear? Thanks.
I'm interested in this, I ride an Izalco Max disc with RAT axles.
I've had a look on the net and found this. Part way down there's someone who had the same issue, which they solved with pliers
http://singletrackworld.com/forum/topic ... xle-owners
Building Spec Allez
Sold
Fuji SL 5.5kg viewtopic.php?f=10&t=157704
Sold -
Izalco Max Disc 6.7kg http://weightweenies.starbike.com/forum ... o+Max+disc
Sold
Fuji SL 5.5kg viewtopic.php?f=10&t=157704
Sold -
Izalco Max Disc 6.7kg http://weightweenies.starbike.com/forum ... o+Max+disc
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Just to post the happy ending of my story for the future reader: I visited my LBS and the bike mechanic had stronger hands then me and with a little bit of effort he screwed the two parts apart (the nut and the small plate). I still think that it's a little bit a design issue that even accidentally you can screw the nut together with a plate so strong that it's almost impossible to separate them. Anyway, problem solved.
Bump!
My rear thru axle isn't turning on my Mares CX. The "quick release" handle just popped off and the axle is pretty much round now. The thru axle is stuck and there is just no way to turn it. My LBS started drilling out the rear thru axle nut socket on the drive side. They didn't finish the job so I took home the bike yesterday and continued drilling out the thru axle.
How do you remove the rear axle nut socket? The little screw next to it only stops the nut from turning but there is just no way of removing the nut. Googled for ages but I'm unable to find a manual about this.
Any ideas?
My rear thru axle isn't turning on my Mares CX. The "quick release" handle just popped off and the axle is pretty much round now. The thru axle is stuck and there is just no way to turn it. My LBS started drilling out the rear thru axle nut socket on the drive side. They didn't finish the job so I took home the bike yesterday and continued drilling out the thru axle.
How do you remove the rear axle nut socket? The little screw next to it only stops the nut from turning but there is just no way of removing the nut. Googled for ages but I'm unable to find a manual about this.
Any ideas?
2022 Wilier Filante SLR Dura-Ace/Ultegra Di2 12sp
2021 Cannondale Scalpel Carbon 2
Retired:
2018 S-Works Tarmac SL6 Sagan Superstar DA 9150
2016 Aeroad CF SLX UDi2
2016 CAAD12 - SRAM Red 22 - Hyper 50mm
2021 Cannondale Scalpel Carbon 2
Retired:
2018 S-Works Tarmac SL6 Sagan Superstar DA 9150
2016 Aeroad CF SLX UDi2
2016 CAAD12 - SRAM Red 22 - Hyper 50mm
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Thanks. Running out of ideas so that is probably the best suggestion.
2022 Wilier Filante SLR Dura-Ace/Ultegra Di2 12sp
2021 Cannondale Scalpel Carbon 2
Retired:
2018 S-Works Tarmac SL6 Sagan Superstar DA 9150
2016 Aeroad CF SLX UDi2
2016 CAAD12 - SRAM Red 22 - Hyper 50mm
2021 Cannondale Scalpel Carbon 2
Retired:
2018 S-Works Tarmac SL6 Sagan Superstar DA 9150
2016 Aeroad CF SLX UDi2
2016 CAAD12 - SRAM Red 22 - Hyper 50mm