Cervelo Áspero Gravel bike

[Kras76]

Hi all, what's the weight, if you know, of a stock Aspero grx600? I cannot find it anywhere online. Thanks.

[hobe]

Ordered 12s Di2 for my aspero then saw the claimed on the website:

**New Shimano road (not gravel) 12 speed front derailleurs reduce tire clearance in the rear of the frame to 700x38c or 650x45b.

does anyone know a little bit of inside why is this the case? I thought the new di2 front mech is smaller compare to the old one.

Very interested in hearing more about this as well as I consider an Aspero. In digging around I found this on the Allied Echo page:
*Due to the wire routing on the Shimano front derailleur, Shimano Echo builds have a 38mm rear tire clearance.

Which seems similar to what Cervelo is stating. Looking at a few builds it does seem like the di2 wire on the FD comes out right near the tire. Anyone have hands on experience with this?

[EsotericCyclist]

My shop currently has an Apex 1 build and wondering if people who have this build are satisfied with it for atleast a season before upgrading? They're offering it to me at $2600 so it seems like a no brainer, especially in the Sunset Purple colorway. Both of my current bikes are Di2 so it will definitely be a step down shifting wise, but when I test rode the bike shifting seemed nice and precise.

[itapersita]

Do you have a picture of yours? @IrrelevantD

Actually, I don't. I used the same stuff to make some protection against dropped chains around the bottom bracket. I didn't take any pictures of what I made for the downtube.

How did you glue the Kytex on the frame? Is it removable?

I am thinking to use an aluminum plate and attach it on the frame with an epoxy glue. I have the same problem, chain drop on my 2x sram 56-33. This bike is not good for 2x, no matter how you adjust it. I also want to use a chain catcher but I read your post about it and I am scared

[skinnybex]

My shop currently has an Apex 1 build and wondering if people who have this build are satisfied with it for atleast a season before upgrading? They're offering it to me at $2600 so it seems like a no brainer, especially in the Sunset Purple colorway. Both of my current bikes are Di2 so it will definitely be a step down shifting wise, but when I test rode the bike shifting seemed nice and precise.

Jump on that deal Asap. The Aspero Frame and Geo is fantastic and thats what makes the bike, drivetrain is really preference but that can be changed later. The most important thing is to dial your fit and get some miles on the bike. The only real upgrades would be Tire, Saddle and Bar and Stem. Drivetrain and Wheels can wait until you really know what you want in 4-6 months when it's prime riding season.

[mb2243]

FYI - I know that chainring clearance is a big topic for the Aspero. I can report that there is plenty of clearance for a 46t 1x chainring using the a Sram DUB wide crankset.

[EsotericCyclist]

Jump on that deal Asap.

Thanks for the info. I put half down on it last night so should be mine soon enough!

[skinnybex]

Jump on that deal Asap.

Thanks for the info. I put half down on it last night so should be mine soon enough!

Where are you located in the Midwest ? I'm in Bentonville and we have the best gravel riding in the country and my Aspero is the perfect fast bike. It's all about tire selection. You'll be able to run any brand 42mm tire with just enough mud/debris clearance left over.

[IrrelevantD]

Do you have a picture of yours? @IrrelevantD

Actually, I don't. I used the same stuff to make some protection against dropped chains around the bottom bracket. I didn't take any pictures of what I made for the downtube.

How did you glue the Kytex on the frame? Is it removable?

I am thinking to use an aluminum plate and attach it on the frame with an epoxy glue. I have the same problem, chain drop on my 2x sram 56-33. This bike is not good for 2x, no matter how you adjust it. I also want to use a chain catcher but I read your post about it and I am scared

3M double sided tape. The dark grey stuff. I wanted it to be removable if needed.

[EsotericCyclist]

Where are you located in the Midwest ? I'm in Bentonville and we have the best gravel riding in the country and my Aspero is the perfect fast bike. It's all about tire selection. You'll be able to run any brand 42mm tire with just enough mud/debris clearance left over.

Im in Southern WI. I have heard that Northern IL also has some pretty good gravel roads and that's the goal this summer, to get down there and check em out. I was planning on signing up for the Unbound 200 but don't know if I can fit it in my schedule and that's even if I get in the lottery. I have heard about Bentonville and it's definitely a place on my list now that I have a gravel bike.