Page 62 of 75

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 12:50 am
by Horacio
Are there any retailers in the US that anyone knows of that have shifters, FD and RD?

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 12:55 am
by djconnel
I just saw a time trial bike set up with 11-speed Di2 at Bicycle Outfitters in Los Altos, CA. I also saw similar on a Trek @ Chain Reaction in Cupertino, CA.

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 1:14 am
by Horacio
Disregard.
I'm hooked up! :beerchug:

Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 1:38 am
by asv
ipenguinking wrote:Can I update the firmware with SM-BCR2 (charger) or do I need SM-PCE1?


The bcr2 will update firmware

http://alexvalentine.org/?p=6496

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 3:24 am
by ipenguinking
asv wrote:
ipenguinking wrote:Can I update the firmware with SM-BCR2 (charger) or do I need SM-PCE1?


The bcr2 will update firmware

http://alexvalentine.org/?p=6496


Can I use bcr2 to turn on multi-shift mode? Or do I still need PCE1?

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 3:34 am
by goodboyr
You can do it all with the charger. Its all in the same piece of software.

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 11:13 am
by bruno2000
Some teams riding Shimano 9070 11spd are using non-branded brakelevers.
Again something new? Or older prototypes?

http://www.cyclingnews.com/paris-nice/s ... tos/254974

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 3:13 pm
by madcow
If you haven't seen pics on scales yet, here are some we took recently including the internal battery. http://www.facebook.com/media/set/?set= ... 480&type=1

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 4:49 pm
by rmerka
Horacio wrote:Disregard.
I'm hooked up! :beerchug:


Did you get your derailluers and shifters from twohubs?

Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 7:47 pm
by 743power
Giant has a few 9070 sets in stock. They don't sell them as groups, but I see they have some of each part in stock. If your lbs is a giant dealer they should be able to order it up for you.

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Wed Mar 06, 2013 11:09 pm
by CerveloMikey
What is a 1 year old 7970 group with 3000 miles worth?

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Mar 07, 2013 4:20 am
by atxfireman
Thanks all for the information on programming the system. I was under the impression that you had to purchase the SM-PCE1 to do it or have the LBS do it. I did not see that information anywhere else, only here in this forum. My LBS confirmed the information. I'm very excited about that.

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Mar 07, 2013 4:24 am
by petal666
Hmm, does that junction box work on Ui2?

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Mar 07, 2013 4:35 am
by Horacio
I got my stuff from Fairwheel. Saw the FB post yesterday and jumped on the phone. I got lucky.

Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Mar 07, 2013 4:39 am
by rmerka
I know the the ultegra junction works on dura ace with a firmware update, suppose the reverse is probably true but I don't know for sure.