Page 5 of 7

Re: power meters selection pros/cons

Posted: Fri Jun 14, 2013 1:17 am
by eric
Saris.

Re: power meters selection pros/cons

Posted: Fri Jun 14, 2013 1:17 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: power meters selection pros/cons

Posted: Fri Jun 14, 2013 1:52 am
by Tinea Pedis
WMW wrote:Curious what your fixes were for bearing and battery life issues?

Bearings were replaced with some Japanese ones, much better.

As for battery, the 'cheap and easy' fix (assuming you have the updated firmware) was more in contrast to what is costs to get a SRM battery replaced. PT is obviously just a quick unscrew of the cap and replacing with batteries that are not all that expensive.

Re: power meters selection pros/cons

Posted: Fri Jun 14, 2013 3:22 pm
by Mario Jr.
Stoo wrote:Well that escalted quickly....

Anyhow, As I am not a pro, or don't intend on competing at any high level, I have gone for the Power2Max

Rotor 3D with 130BCD 53/39 O-Rings.
Went 3D over 3D+ so that I can swap between bikes when/if I need to...

Meter, crank, rings, bolts, tool.... £950ish delivered.

Thanks guys.


Just to correct, 3D+ is NOT BB30. It can be used on BB30, that's right. But the spindle has the length of a 24mm Shimano crank, so it can be used on BSA or BB86 frames. You would just need the right bearings.

power meters selection pros/cons

Posted: Fri Jun 14, 2013 3:34 pm
by Stoo
It has a 30mm spindle rather than 24mm is what I meant.

Yeah it can be used in BB86 with adapters but I'd rather the ease if interchangeability between one bike and another that has ultegra cranks.

Re: power meters selection pros/cons

Posted: Sat Jun 15, 2013 12:14 am
by Tinea Pedis
Mario, how did you establish the power 'over reading' that the P2M was giving? Not that I don't believe you, just curious on your process.

That would be a little concerning if I were an owner.

Re: power meters selection pros/cons

Posted: Sat Jun 15, 2013 7:38 am
by airwise
As a Campag user, it really would be nice for there to be a discrete alternative to a chunky Powertap or phenomenally expensive Record SRM.

As for Powertap, I've been generally happy over the past few years. Bearing are rough and need replacing quite often and the torque tube does need adjusting if you do decent mileage. But the product gives reliable data, more than could be said for some of the alternatives that I tried.

My SRM is a delight - sadly pricing puts it out of the ballpark for many (including me) unless picked up used. Very few used Campag cranks.....

Re: power meters selection pros/cons

Posted: Sat Jun 15, 2013 8:53 am
by CAFERACER
On campy you could always run the cannondale SRM with praxis or cannondale rings. Otherwise yeah, its expensive campy SRM time.

Re: power meters selection pros/cons

Posted: Sat Jun 15, 2013 10:02 am
by Tinea Pedis
10sp SRM cranks are fine on 11sp Campag.

Used SRAM and Shimano without an issue.

Re: power meters selection pros/cons

Posted: Sat Jun 15, 2013 12:54 pm
by angrylegs
airwise wrote:As a Campag user, it really would be nice for there to be a discrete alternative to a chunky Powertap or phenomenally expensive Record SRM.


I'm not following, so excuse me if it's just my morning's coffee not yet kicking in, but:

I run Campy. I've got a Rotor 3D crank installed with Quarq and Q-rings. Runs flawlessly. Based on this, I don't see anything wrong with running Rotor's PM with Q-rings for my next build, which is nice as that one I can get in compact and run either 52-36 or 53-38 Q-rings on it. Can of course go with a selection of round rings if Q isn't your thing. Based on that, I wouldn't anticipate any issues running Power2Max with Campy either, as you could put it on Rotor 3D or 3D+, or a number of other options. Granted, you aren't running a Campy crank, but it works perfectly fine.

Re: power meters selection pros/cons

Posted: Sat Jun 15, 2013 6:04 pm
by airwise
I ran a Rotor Quarq for a while. Horrible problems in the mountains - unreliable data. It didn't last. It also looks like something out of a cheap Disney scifi film of the eighties (to my eyes sorry).

Can't run my SRM Hollowgram either as I now have a standard BB.

Re: power meters selection pros/cons

Posted: Sat Jun 15, 2013 11:27 pm
by Geoff
The Csmpagnolo SRM is a thing of beauty. It is expensive, but worth it.

Re: power meters selection pros/cons

Posted: Sun Jun 16, 2013 12:14 am
by angrylegs
airwise wrote:I ran a Rotor Quarq for a while. Horrible problems in the mountains - unreliable data. It didn't last. It also looks like something out of a cheap Disney scifi film of the eighties (to my eyes sorry).


Really? Mine's been solid. And what's wrong with cheap Disney-style 80's sci-fi? It was awesome! :mrgreen: No worries though. I'm not really seeing it, although it may be because mine's on Rotor TT Q rings and a 3D crank. The Quarq unit just blends in on my setup, but ymmv for sure.

Try the Rotor PM. Cleaner lines, good weight and reads power on both sides. At least, it's another alternative, as is the Power2Max, if you don;t like Quarq. I'll be able to report on the Rotor PM and my experiences with it in the mountains in the fall (I hope), as well as having power comparison data between it and the Quarq.

Re: power meters selection pros/cons

Posted: Sun Jun 16, 2013 12:23 am
by Tinea Pedis
airwise, did you miss my post?

Re: power meters selection pros/cons

Posted: Sun Jun 16, 2013 4:46 am
by claus
For me the problem with a non-Campagnolo SRM is the Q-factor. I looked through all of them on the SRM site and found only cranks that are wider than Campagnolo.

Re: power meters selection pros/cons

Posted: Sun Jun 16, 2013 5:18 am
by rchung
petepeterson wrote:Keep in mind this is an internet forum and all of these posts are individual opinions and people recommend what they know/like/have. With that in mind I really have to question why people recommend hub based power these days?


In my case, there are two reasons: 1) In order to get the right aero position, my TT bike uses a different crank length than my road bike, so it's easier and cheaper to swap the PT hub than to have two different crank-based power meters; and 2) if you do CdA or Crr testing then a PT is "closer" to the physics (that is, you don't have to worry about drive train losses or distortions from non-round rings).

Re: power meters selection pros/cons

Posted: Sun Jun 16, 2013 5:18 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com