Tillquist's kitchen!

Discuss light weight issues concerning road bikes & parts.
strangely
Posts: 41
Joined: Fri Sep 06, 2013 5:14 pm

by strangely

Given the soon to be released Garmin Edge 1000, are there any plans to offer a longer mount, or maybe a shim that could be added with longer bolts? Based on the dimensions posted for the 1000, it looks like it won't fit the current mount.

Also seeing as though the 1000 will support landscape view, it might be a good idea to rethink the mount perhaps to allow for this?

Somewhere up the thread, somebody posted a picture of their Di2 junction box mounted on there. I did something similar with tie wraps, but it would also be nice to see an option for this that would be something more elegant than either approach?

by Weenie


Tillquist
Posts: 1593
Joined: Fri Dec 30, 2005 3:33 pm
Contact:

by Tillquist

strangely wrote:Given the soon to be released Garmin Edge 1000, are there any plans to offer a longer mount, or maybe a shim that could be added with longer bolts? Based on the dimensions posted for the 1000, it looks like it won't fit the current mount.

Also seeing as though the 1000 will support landscape view, it might be a good idea to rethink the mount perhaps to allow for this?

Somewhere up the thread, somebody posted a picture of their Di2 junction box mounted on there. I did something similar with tie wraps, but it would also be nice to see an option for this that would be something more elegant than either approach?


I'm thinking about an Garmin Edge 1000 mount, but I must first even have bought a Garmin Edge 1000 my self before I can make a mount that fits it.

I also thought of landscape mount the Edge in 1000 and has reached that I could make a mount where you have to use the original plastic insert from Garmin OUT-FRONT mount, it can then be mounted in my mount and could be rotated 90 degrees as well.
See all my bike h e r e

kode54
Posts: 1162
Joined: Tue May 23, 2006 9:39 pm

by kode54

Tillquist wrote:
strangely wrote:Given the soon to be released Garmin Edge 1000, are there any plans to offer a longer mount, or maybe a shim that could be added with longer bolts? Based on the dimensions posted for the 1000, it looks like it won't fit the current mount.

Also seeing as though the 1000 will support landscape view, it might be a good idea to rethink the mount perhaps to allow for this?

Somewhere up the thread, somebody posted a picture of their Di2 junction box mounted on there. I did something similar with tie wraps, but it would also be nice to see an option for this that would be something more elegant than either approach?


I'm thinking about an Garmin Edge 1000 mount, but I must first even have bought a Garmin Edge 1000 my self before I can make a mount that fits it.

I also thought of landscape mount the Edge in 1000 and has reached that I could make a mount where you have to use the original plastic insert from Garmin OUT-FRONT mount, it can then be mounted in my mount and could be rotated 90 degrees as well.


sounds like a great idea. can't wait.
- AX Lightness Vial EVO D + DA9150 + Enve SES 3.4 carbon hubs
- Parlee Altum + DA9150 + Enve SES 4.5 carbon hubs
- Parlee ESX + DA9150 + THM SRM PM + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + DA9100 + Enve 3.4 CK hubs

Lewis
Posts: 124
Joined: Thu Aug 16, 2012 1:22 pm
Location: UK - Hertfordshire

by Lewis

Tillquist - I know I previously asked for a Garmin mount, but could you make a similar style of mount for a cateye? Many people have these too so would be a good seller I think.

I have a barfly out in front mount for my new stealth, but it's not very neat, and doesn't sit level with the stem from the side (despite that it looks level in this picture)

Image


This looks so much better (on a side note, does anyone know what model this Garmin is?):

Image
2012 Canyon Ultimate AL 8.0

kode54
Posts: 1162
Joined: Tue May 23, 2006 9:39 pm

by kode54

Lewis wrote:Tillquist - I know I previously asked for a Garmin mount, but could you make a similar style of mount for a cateye? Many people have these too so would be a good seller I think.

I have a barfly out in front mount for my new stealth, but it's not very neat, and doesn't sit level with the stem from the side (despite that it looks level in this picture)

This looks so much better (on a side note, does anyone know what model this Garmin is?):




that looks like a Garmin Edge 810 with silicone cover on it.
- AX Lightness Vial EVO D + DA9150 + Enve SES 3.4 carbon hubs
- Parlee Altum + DA9150 + Enve SES 4.5 carbon hubs
- Parlee ESX + DA9150 + THM SRM PM + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + DA9100 + Enve 3.4 CK hubs

Tillquist
Posts: 1593
Joined: Fri Dec 30, 2005 3:33 pm
Contact:

by Tillquist

Lewis wrote:Tillquist - I know I previously asked for a Garmin mount, but could you make a similar style of mount for a Cateye...


No, only mount for Garmin Edge computer.
See all my bike h e r e

User avatar
Stolichnaya
Posts: 2621
Joined: Wed Oct 06, 2004 6:55 pm
Location: Vienna, AUT

by Stolichnaya

Tillquist, just wanted to thank you again for your support on the mount for the Syntace stem.
The slight drilling out of the 24mm Garmin mount to fit the M6 bolts combined with some M6x30mm narrow head ti bolts from Toronto Cycles worked quite well!

RichTheRoadie
Tinker, Taylor, Tart
Posts: 1994
Joined: Sat Nov 29, 2008 8:00 pm
Location: Sydney, Aus.

by RichTheRoadie

My mount arrived today for my 3T ARX Ltd. What a great bit of kit!

Tillquist
Posts: 1593
Joined: Fri Dec 30, 2005 3:33 pm
Contact:

by Tillquist

Image

New mount coming soon......
See all my bike h e r e

Lewis
Posts: 124
Joined: Thu Aug 16, 2012 1:22 pm
Location: UK - Hertfordshire

by Lewis

Nice. Did I also hear you're making a cateye one? ;)


Sent from my iPhone using Tapatalk
2012 Canyon Ultimate AL 8.0

Nefarious86
Moderator
Posts: 2186
Joined: Sun May 25, 2014 4:57 am
Contact:

by Nefarious86

Tillquist wrote:Image

New mount coming soon......


Long enough to take the 1000?
Using Tapatalk

Tillquist
Posts: 1593
Joined: Fri Dec 30, 2005 3:33 pm
Contact:

by Tillquist

Nefarious86 wrote:
Tillquist wrote:Image

New mount coming soon......


Long enough to take the 1000?


Nope, but i have made A version for Edge 1000.
See all my bike h e r e

Nefarious86
Moderator
Posts: 2186
Joined: Sun May 25, 2014 4:57 am
Contact:

by Nefarious86

Nice :) how much for one to suit an edge 1000 for both the superlogic and an S-works SL stem?


( http://www.specialized.com/us/en/ftb/ro ... ander-plug )
Using Tapatalk

Tillquist
Posts: 1593
Joined: Fri Dec 30, 2005 3:33 pm
Contact:

by Tillquist

Nefarious86 wrote:Nice :) how much for one to suit an edge 1000 for both the superlogic and an S-works SL stem?


( http://www.specialized.com/us/en/ftb/ro ... ander-plug )


Send me A email :-)
See all my bike h e r e

by Weenie


kode54
Posts: 1162
Joined: Tue May 23, 2006 9:39 pm

by kode54

Tillquist wrote:Nope, but i have made A version for Edge 1000.


are you going to use the plastic insert this time for the new 1000?

also, since it is thinner, will you make it sit higher? like flush to the top of the stem instead of the middle?

would like to see what you plan for the Enve stems.
- AX Lightness Vial EVO D + DA9150 + Enve SES 3.4 carbon hubs
- Parlee Altum + DA9150 + Enve SES 4.5 carbon hubs
- Parlee ESX + DA9150 + THM SRM PM + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + DA9100 + Enve 3.4 CK hubs

Post Reply