ms6073 wrote:Vallinotti wrote:Could someone advice which battery to buy to replace the battery of a SRM DA 9000?
Remove the SRM from the bike and unbolt the torx head screws that secure the crank arm to the spider and you will then be able to remove the front cover with a precission screw driver. I cannot recall what the battery model was but unlike our Hollowgram SRM's, I was not able to source a direct replacement in the US, and you will need batteries with pre-soldered pigtails. As I cautioned above, the DA 9000 SRM uses a micro connector with 32-gauge wires, so unless you are a master with a soldering iron and micro electronic PCBs, I am going to dsuggest you send it to an SRM Sewrvice center. I managed to mangle the micro connector on mine, thus I had to send it to SRM anyway, but on the plus side, SRM updated the firmware so that now my Garmin displays the battery status under sensor details.
2 x Eve ER14250 1/2AA 3.6v 1200mah batteries