Triton Disk Road 3D printed titanium

[elfuinha]

Hello

Since i'm moving toward 47 years old, i decided to ingress in a project... and not wait for my 50 year old crises, the date i establiched has the date to buy a new Bike, this time a Road Disk Titanium bike and would like to share some of the process of this new bike... expecially the Frame.

Triton is a Titanium Bike builder on my country and relative near me... 300km. - https://www.tritaobikes.com/

They are really GREAT guys, Dmitry and Roman and have been very responsive, helpfull, and patient about by thoughts for this bluid.

This will be a colect over the time, parts to do the bluid, as some parts are expensive.

I will try to share as this will come along.

i think it will turn up GREAT.

Bike will be made with:

3D Printed Headtube
3D Printed BB and part of the Chainstays
3D Printed Droupouts and the other part of the Chainstays
3D Printed Seatcluster with integrated clamp
Tubing will be the Columbus Hyperon
Brushed... Minimal logos, just the Headtube.

Part list below is not final.

Some videos:

Triton 1st iteration:
https://www.dropbox.com/scl/fi/4rv8pa82 ... ohryn&dl=0
Triton 2nd iteration
https://www.dropbox.com/scl/fi/pxx3ubrj ... l02ha&dl=0
Triton 3rd iteration
https://www.dropbox.com/scl/fi/78d548de ... wizmp&dl=0
Chainstays
https://www.dropbox.com/scl/fi/lncegsxf ... jh2oj&dl=0

[HannibalLecter]

Nice project. Which software is that? Will you 3d print the complete chainstay? That seems tricky. Also the bb interface needs to be machined after 3d printing, possibly brake mounts too. I had in mind a similar project but the cost was prohibitive

[elfuinha]

Nice project. Which software is that? Will you 3d print the complete chainstay? That seems tricky. Also the bb interface needs to be machined after 3d printing, possibly brake mounts too. I had in mind a similar project but the cost was prohibitive

I don't know software details.

The BB will be T47, so it as to be machined for the threads.

brake mounts maybe to faced

[elfuinha]

5Dev road crank + Sigeyi 8 Bolt Powermeter

This crankset is heavier than EEWINGS but the finish is superb

[elfuinha]

Same parts coming together:

Crank and chainrings and Powermeter

5DEV ROAD CRANK 175mm

CARBON-TI 48/35 CHAINRINGS AXS

SIGEYI SRAM 8 POWERMETER

SRAM BALCK ALUMINIUM CHAINRING BOLTS

Missing the ALUGEAR titanium bolts that should arrive next week.

[elfuinha]

4g saved with ALUGEAR Ti Screw M4x8 for Sram 8 Bolts

[elfuinha]

update 08-12-2024

[Hensem]

How much costs this frame?

[mike]

that crank is a work of art!

[elfuinha]

How much costs this frame?

Please contact triton at - info@tritaobikes.com.

Best Regards

[elfuinha]

that crank is a work of art!

Yes it is...

I also have the EEWINGS on another bike and also like them to... in the same setup...

[elfuinha]

update 08-12-2024 - Part 2

[Hensem]

1

[elfuinha]

Silca UDH Sram

[mike]

keep the pics coming ! loving this build thread