Aethos Inspired Chinese 6.3kg Build with Quality Chinese Components ( ICAN FL1 ) - listing updated for final build

[Marioooouzd]

thank you for the info!

[kyrliot]

I built a bike based on ican fl1 frame with their handlebar and seatpost.The groupset is ultegra 2x11 mechanical with magene pes 505 base powermeter.The wheels are elite edge 40mm v.1.Weight is 7,3kg with shimano m520 spd pedals and bottle cages plus computer and varia mounts.

[kyrliot]

The frame size is 56.

[Marioooouzd]

Nice bike! Did you weight the frame and other elements before the full building?

[kyrliot]

Only the frame was exactly 1 kg.

[kyrliot]

The rear through axle was on the frame so net weight is around 950gr painted.

[Woodstock]

Awesome bike! Did you have issues with the magene powermeter? On their website they state it isn't compatible with the T47 BB?

[zen28150]

Hello,
When I tighten the headset screw, the fork does not turn anymore and remains blocked. It seems that there is a missing part between the headset bearing, the half-U metal part and the stem spacer.
I have an Avian Canary handlebar.
I took the bearings provided by Ican and I took the spacers provided by Avian.
Do you have any clue to solve my problem, please ?
Thank you for your help,

[Beancouter]

Hello,
When I tighten the headset screw, the fork does not turn anymore and remains blocked. It seems that there is a missing part between the headset bearing, the half-U metal part and the stem spacer.
I have an Avian Canary handlebar.
I took the bearings provided by Ican and I took the spacers provided by Avian.
Do you have any clue to solve my problem, please ?
Thank you for your help,

You should have one of these under the bearing cover


Sent from my iPhone using Tapatalk

[kyrliot]

Awesome bike! Did you have issues with the magene powermeter? On their website they state it isn't compatible with the T47 BB?

I have the magene power on the ican fl1 and on an AliExpress gravel bike (cwind gt30) with also t47 bb and i didnt have any "fitting" issues on either.

[zen28150]

Hello,
When I tighten the headset screw, the fork does not turn anymore and remains blocked. It seems that there is a missing part between the headset bearing, the half-U metal part and the stem spacer.
I have an Avian Canary handlebar.
I took the bearings provided by Ican and I took the spacers provided by Avian.
Do you have any clue to solve my problem, please ?
Thank you for your help,

You should have one of these under the bearing cover


Sent from my iPhone using Tapatalk

Thank you for your help
Should this part go on the bottom or top bearing?

[zen28150]

I put this part but it still remains blocked

[Beancouter]

I put this part but it still remains blocked

Do you need more spacers? With the bit I showed, one the bars are on, and before the compression cap is put on and tightened there should be about 2 or 3 mm from the top of the stem.


Sent from my iPhone using Tapatalk

[zen28150]

I put this part but it still remains blocked

Do you need more spacers? With the bit I showed, one the bars are on, and before the compression cap is put on and tightened there should be about 2 or 3 mm from the top of the stem.


Sent from my iPhone using Tapatalk

I think I don't need more spacers.
When I see your bottom first spacer. It's not the same than you.
I sent an email to Avian.

[aratrus]

i have the same issue, the bearing compression ring of my handlebar set is 5mm thicker, i think it must be 8 mm or 10 to work