Roval Rapide Cockpit

[MirFlash]

That seems like the original Aethos top cap. I wish I could get this aftermarket. Is very neat.

Go to Speci outlet will order it or if you insist you get hold of it immediately, suddenly stock available ..

As far I remember was 9€ I paid, 3 months ago.

[BBres]

It’s the same degree, 115 works if you are using 110 stem with aerofly 2 bars. 110 stem and 80 reach. The roval bars are 75mm which is the same as this cockpit.


Sent from my iPhone using Tapatalk

According to Specialized Website, both of them are 75 reach. At the moment I ride 110 stem + 380 rapide handlebar, wanted to switch to 115x380 rapide cockpit, but now I'm confused.

[CrankAddictsRich]

It’s the same degree, 115 works if you are using 110 stem with aerofly 2 bars. 110 stem and 80 reach. The roval bars are 75mm which is the same as this cockpit.


Sent from my iPhone using Tapatalk

According to Specialized Website, both of them are 75 reach. At the moment I ride 110 stem + 380 rapide handlebar, wanted to switch to 115x380 rapide cockpit, but now I'm confused.

Yes... both are 75mm reach.

I did the same swap you're thinking about, on my Allez. I was able to adjust to the additional 5mm reach without issue. I actually like the fit of my Allez better than my current Tarmac SL6 because of this change and when I build my SL8, i'll be setting it up the same.

[BBres]

Right, but in my case the current fit is ideal. I would not want to make it any longer. I am a little disappointed.

[CrankAddictsRich]

Right, but in my case the current fit is ideal. I would not want to make it any longer. I am a little disappointed.

Unfortunately, that's the downside of one piece cockpits... they don't make them in EVERY possible configuration.

[aeroisnteverything]

Right, but in my case the current fit is ideal. I would not want to make it any longer. I am a little disappointed.

5mm is easily adjusted by moving saddle fore or aft a little bit and maybe a 1-2mm up or down. It's really going to be hard to notice.

[razorree]

Right, but in my case the current fit is ideal. I would not want to make it any longer. I am a little disappointed.

5mm is easily adjusted by moving saddle fore or aft a little bit and maybe a 1-2mm up or down. It's really going to be hard to notice.

or put your shifters/hoods a bit lower/futher on a handlebar.

[dalex]

Unfortunately, that's the downside of one piece cockpits... they don't make them in EVERY possible configuration.

Factor/Black Inc do with their Integrated Aero Barstem.

[CrankAddictsRich]

Unfortunately, that's the downside of one piece cockpits... they don't make them in EVERY possible configuration.

Factor/Black Inc do with their Integrated Aero Barstem.

Last time I checked, this thread wasn't about the Factor/Black Inc cockpit....

[jayjay]

I wish they made a 380 x 130.

How about the Enve one piece?

[BenniH2787]

Hi guys,
In case anyone is looking to install the Rapide cockpit on slammed SL7 I have one spare headset cover from @theStickyBottle available, 10mm height, for images see the quoted post.

price 25€ + shipping(I'm from Slovakia. Within EU I can use post tracked package, this should cost just few euros.)

Hi,
is the cover still available? I would take it with shipping to Germany.
You can write me, if it is still available.

Ride on, Benni

Thanks again for the spacer!
Now, here is my Setup with a 420/120 Cockpit and a Hidemybell Wahoo Mount.

I am very interested in finding out what combo of top cap you're running here. Looks fantastic

Sorry, I was inactive for a while...

Yeah right, its the Aethos Topcap w screw.
In the meantime I got the Topcap from Hopp Carbon Parts with aluminium screw:



So I could send you the Aethos Cap, if you are located in Germany?

[sigma]

It’s the same degree, 115 works if you are using 110 stem with aerofly 2 bars. 110 stem and 80 reach. The roval bars are 75mm which is the same as this cockpit.


Sent from my iPhone using Tapatalk

According to Specialized Website, both of them are 75 reach. At the moment I ride 110 stem + 380 rapide handlebar, wanted to switch to 115x380 rapide cockpit, but now I'm confused.

I believe the Aerofly II bars were 80mm reach while the rapide bars and cockpit are both 75mm.

[Charlie69]

It’s the same degree, 115 works if you are using 110 stem with aerofly 2 bars. 110 stem and 80 reach. The roval bars are 75mm which is the same as this cockpit.


Sent from my iPhone using Tapatalk

According to Specialized Website, both of them are 75 reach. At the moment I ride 110 stem + 380 rapide handlebar, wanted to switch to 115x380 rapide cockpit, but now I'm confused.

I believe the Aerofly II bars were 80mm reach while the rapide bars and cockpit are both 75mm.

My aerofly 2,bars in size 38 has 75mm reach but I think anything wider than that has 80mm reach.

[Derek305t]

Sorry, I was inactive for a while...

Yeah right, its the Aethos Topcap w screw.
In the meantime I got the Topcap from Hopp Carbon Parts with aluminium screw:



So I could send you the Aethos Cap, if you are located in Germany?

Very Nice

[sigma]

It’s the same degree, 115 works if you are using 110 stem with aerofly 2 bars. 110 stem and 80 reach. The roval bars are 75mm which is the same as this cockpit.


Sent from my iPhone using Tapatalk

According to Specialized Website, both of them are 75 reach. At the moment I ride 110 stem + 380 rapide handlebar, wanted to switch to 115x380 rapide cockpit, but now I'm confused.

I believe the Aerofly II bars were 80mm reach while the rapide bars and cockpit are both 75mm.

My aerofly 2,bars in size 38 has 75mm reach but I think anything wider than that has 80mm reach.

That could very well be - mine are 42 and 44 - before the era of narrow bar adoption for me. Thanks for clarifying!