I'm looking at converting my current Dogma F10 from mechanical to 12s EPS and have a question about cable routing.
For the FD the cable entry seems to be the same as the mechanical cable entry? (not very tidy)
And i had a play around with the routing and the EPS connectors don't seem to fit inside the hole, have people had to shave the connectors down to fit through?
Thanks!
Anyone w/ Dogma F10 and SR EPS?
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- jdecraene85
- Posts: 136
- Joined: Wed Dec 02, 2015 1:44 pm
- Location: Kluisbergen, Belgium
I have a Dogma F10 with Campy SR EPS 12.
Installation required focus and guiding the cables was sometimes a little finnicky, but I'm not a professional mechanic either...
I encountered no real problems during installation.
I used the magnetic cable guiding tool, which helped.
Did not have to shave any connectors.
Here's the bike:
Installation required focus and guiding the cables was sometimes a little finnicky, but I'm not a professional mechanic either...
I encountered no real problems during installation.
I used the magnetic cable guiding tool, which helped.
Did not have to shave any connectors.
Here's the bike:
Last edited by jdecraene85 on Fri Dec 09, 2022 2:51 pm, edited 1 time in total.
Looks great! If you have the time, would you be able to share a photo or video of the FD cable journey into the frame?jdecraene85 wrote: ↑Fri Dec 09, 2022 2:10 pmI have a Dogma F10 with Campy SR EPS 12.
Installation required focus and guiding the cables was sometimes a little finnicky, but I'm not a professional mechanic either...
I required no real problems during installation.
I used the magnetic cable guiding tool, which helped.
Did not have to shave any connectors.
Here's the bike:
20220419_195335-01_3_40.jpeg