EXS Aerover Cockpit

[stevec1975]

This is the short version, the Wahoo/Garmin unit aligns the top of the screen to the top of the stem

FYI: I painted this Matt black to match.

[Bianchi10]

This is the short version, the Wahoo/Garmin unit aligns the top of the screen to the top of the stem

FYI: I painted this Matt black to match.

Can I request you mount the computer and take a photo (whenever you have the chance)

1) from above
2) low profile to see how level it is with the bar

Please/thank you

[stevec1975]

Luckily I had to go to the beer/bike shed, so grabbed a couple of pics/beers!

The Wahoo is a Bolt v2

[Bianchi10]

Luckily I had to go to the beer/bike shed, so grabbed a couple of pics/beers!

The Wahoo is a Bolt v2

Great, thank you for taking the time to post!

I'd like to find something that has les gap than this if something happens to even exist. I know this brand isn't exaclty a house hold name, so I'm aware options are minimal. The Frame and Gear option is 98mm in length which would most likely be the same if not longer than this one.

[asianwaytgh]

I got a 120x36cm for sale. Ridden one season and no crashes.

I'll take this. dm me and we'll work it out?

[noub]

Luckily I had to go to the beer/bike shed, so grabbed a couple of pics/beers!

The Wahoo is a Bolt v2

Great, thank you for taking the time to post!

I'd like to find something that has les gap than this if something happens to even exist. I know this brand isn't exaclty a house hold name, so I'm aware options are minimal. The Frame and Gear option is 98mm in length which would most likely be the same if not longer than this one.

TI Parts also offers a mount, albeit pretty pricy. https://tipartstitanium.com/products/ex ... ba0f&_ss=r

[Bianchi10]

Yeah, I saw that one. I'm all for paying for the parts to achieve specific wants/needs, but I'd have a hard time paying nearly that much for a computer mount which is 40% of what the bars cost.

[filmillr]

I've skimmed through this thread, but not really seeing much in terms of aftermarket computer mounts. I just ordered my Aerover bars and not a fan of the stock mount as it leaves such a large gap between the bottom of the computer and the front of the bars. I'm using a Wahoo Roam II and looking for a shorter reach option. I'd also like the ability to adjust the angle to what I want instead of follow the stem angle. I see that Frames and Gear has an adjustable one, but again is very long.

Anyone have suggestions?

This Frames and Gear mount should work great
https://framesandgear.com/en-us/product ... d_source=1

Thank you for taking the time to suggest, but I had already mentioned that the Frames and Gear mount would also be too long.

Well I may need some reading glasses I guess - whoops

[Bianchi10]

Just got my bars and really impressed with the quality. This is the standard computer mount here. I really want to find a computer mount that has far less of a gap. Ideally I'd love to find one that allows just enough room to rotate the computer into position, perhaps were I have this red line drawn.

[Eterna7m]

One does supply the information whether 1 1/4 or 1 1/8 is needed during ordering right? Via "special instructions"? And the bike model?
Or is it 1 1/4 by default and either they supply shims or don't ?

[stevec1975]

It’s 1 1/4 by default and comes with a carbon spacer which takes it down to 1 1/8

[Eterna7m]

Ah okay. Makes sense. Could not have imagined they manufacture different version with their limited supply.
Thanks

[alanyu]

Just got my bars and really impressed with the quality. This is the standard computer mount here. I really want to find a computer mount that has far less of a gap. Ideally I'd love to find one that allows just enough room to rotate the computer into position, perhaps were I have this red line drawn.

The short Ti mount is designed to clear Roam

[stevec1975]

Just got my bars and really impressed with the quality. This is the standard computer mount here. I really want to find a computer mount that has far less of a gap. Ideally I'd love to find one that allows just enough room to rotate the computer into position, perhaps were I have this red line drawn.

Reach out to Lucendi.ww on Instagram, he makes the one below for the EXS Aerover bar and can likely do any length you want.

[Bianchi10]

Just got my bars and really impressed with the quality. This is the standard computer mount here. I really want to find a computer mount that has far less of a gap. Ideally I'd love to find one that allows just enough room to rotate the computer into position, perhaps were I have this red line drawn.

Reach out to Lucendi.ww on Instagram, he makes the one below for the EXS Aerover bar and can likely do any length you want.

Saweet!! Thank you for that info

*Update: I chatted with Lucendi and he does not feel comfortable making computer mounts because he is not confident in the strength and durability.

So, I guess the search continues...