Hello everyone.
I'm looking for a 1 1/8 - 1 1/4 carbon fork (not disc) as light as possible. To be able to be less than 300 gr. Could you tell me a model that you know?
Thank you very much.
All the best.
Ultralight fork carbon 1 1/8 - 1 1/4
Moderator: robbosmans
-
Mostlyharmless
- Posts: 54
- Joined: Fri Apr 13, 2018 2:12 am
THM Scapula for sure
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
2019 Cannondale SUPERSIX Evo Himod should be around 260g stripped and cut. You can find weight in build threads, for example.
THM seems to be no longer made 
maybe WR Compositi FK1 ? or from second hand - look hsc / scott addict sl ?
maybe WR Compositi FK1 ? or from second hand - look hsc / scott addict sl ?Hello sorry for hijack the thread...
Also looking for a new fork...since my Costum THM Scapula CT just colapsed around the brake brige... they don’t make forks no more and this kind of damage i don’t think will relaiable a repair... still didn't explore this LAST option with THM.
It was not over torque as the fork limit is 12Nm and the brake sleeve is torqued to 10Nm same brand...mounted according to manual.
Note the scapula CT uses a 1 1/2 bearing not a 1 1/4.
My options right now are very narrow... i can go with a 1/4 have to replace the headset or a 1/2:
Not looking for a sub 300g has durability is now my main consern:
Enve 2.0 1/4
Wr Compositi FK4 1/2
Columbus Futura 1/2 ... since the 1/4 is just to heavy... this options needs paint job.
Cannondale evo 1/4 no where to be found...
Also consedering a NEVI Strada Fork but that is 550g uncut and 1690€... big investement and more 200g on the bike.
Also looking for a new fork...since my Costum THM Scapula CT just colapsed around the brake brige... they don’t make forks no more and this kind of damage i don’t think will relaiable a repair... still didn't explore this LAST option with THM.
It was not over torque as the fork limit is 12Nm and the brake sleeve is torqued to 10Nm same brand...mounted according to manual.
Note the scapula CT uses a 1 1/2 bearing not a 1 1/4.
My options right now are very narrow... i can go with a 1/4 have to replace the headset or a 1/2:
Not looking for a sub 300g has durability is now my main consern:
Enve 2.0 1/4
Wr Compositi FK4 1/2
Columbus Futura 1/2 ... since the 1/4 is just to heavy... this options needs paint job.
Cannondale evo 1/4 no where to be found...
Also consedering a NEVI Strada Fork but that is 550g uncut and 1690€... big investement and more 200g on the bike.
- Attachments
-
-
-
