Wahoo Speedplay Zero spindle swap

[FlatlandClimber]

I really love those WW tuning mods.
However, does anyone know where to get the Titanium cleats? I have one pair of those, but this is probably the biggest potential of saving for me.

[Butcher]

So, you are saying it took 3 mins and 5 mins to break loose the bolts or physically break?

[MrCurrieinahurry]

He defo means break the loctite bond.

Basso Diamante super record EPS 12
BMC slr01 ultegra Di2

[Hexsense]

Anyone know how the loose pedal on the axle develop?
I converted two sets onto J&L axle. Both didn't have problem on their stock spindle. Before these two sets, I warrantied a few set before due to loose pedal on the axle. But thess sets last for months so I thought Wahoo fixed the pedal body already.
Then after conversion, one set became loose right away. Another became loose within one ride. Move pedal body back to their original axle didn't help either. It's done...

I start to think heat used to break factory loctite could be one of the cause. Or maybe J&L Axle.

[ryanw]

Did you reapply Loctite on the new spindle?

I have't done on any of my sets, torqued to 4nm, no lateral play. Using Dulight spindles.

[Butcher]

If I were to use locktite, I would use the low tension stuff. Just enough to prevent the bolt from coming out. Not the red or blue stuff. I always believe a properly torqued bolt will not back out. There are exceptions.

[Ronin416]

Did you reapply Loctite on the new spindle?

I have't done on any of my sets, torqued to 4nm, no lateral play. Using Dulight spindles.

Hmmm, maybe a opportunity for ready to ride - converted Rhino/Dulight Wahoo’s!


Sent from my iPhone using Tapatalk

[stevec1975]

Dulight sell the fully converted pedals with their Ti Spindles (as well as the Ti plates and screws pre-installed)

[ryanw]

Not the aero pedals (And they don't make a Ti plate for the aero pedal).

[KalviDj]

This is the wahoo spindle or the former speedplay?
https://www.ebay.es/itm/374713980533?mk ... media=COPY

[Aryeh]

I just ordered a pair of comps on sale for $75 to eventually replace my last gen pedals (144g).
I will be ordering this kit tomorrow when it goes on sale.

[scico]

And those little cylinders? Which part are ment to replace?

[Aryeh]

I got the rrskit titanium set today.
Below is the weight of one pedal before and after swapping the parts.
Total for both pedals is 155g.
I will post the individual part weights below

[Aryeh]

Here's all the individual parts

[scico]

Nice! Keep us updated on lateral play occurring.