I am in search of an 8 bolt mount, 5 bolt 130 BCD spider for a non-AXS crankset. I saw one on ebay but it's 110 BCD. A direct mount chainring would also work but would have to be at least 46t (preferably 48), wolftooth only makes a 40 and a 44.
I saw this picture in the document below (page 7 on the right) but I haven't been able to find anything from SRAM.
https://www.sram.com/globalassets/docum ... manual.pdf
Alternatively, would I be able to put an 8 bolt AXS spider onto an 8 bolt non AXS crankset and run it with an 11 speed chain?
Thanks!
SRAM/Quarq spider questions
Moderator: robbosmans
Yes, it fits, assuming you're talking about this one, for example: https://r2-bike.com/SRAM-Quarq-Power-Me ... BCD-130-mm
However, the mounting plane is different by 1..2 mm on the 8 bolt AXS Dub vs old 8 Bolt Red BB30(386) cranks, which might or might not cause front shifting problems depending on frame and BB you have.
Minimum bike categories required in the stable:
Aero bike | GC bike | GC rim bike | Climbing bike | Climbing rim bike | Classics bike | Gravel bike | TT bike | Indoors bike
Aero bike | GC bike | GC rim bike | Climbing bike | Climbing rim bike | Classics bike | Gravel bike | TT bike | Indoors bike
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Yes I know that one fits, it's meant to go on a non AXS crankset. I was talking about a standard spider though, not a power meter one. The crankarm sits into a concave part of the spider and I am pretty sure they have a slightly different profiles, I just don't know if it's to the point where it would interfere. I did find that Garbruk, and alugear both make DM chainrings bigger than 44, so that might work.mrlobber wrote: ↑Fri Sep 24, 2021 8:13 pmYes, it fits, assuming you're talking about this one, for example: https://r2-bike.com/SRAM-Quarq-Power-Me ... BCD-130-mm
However, the mounting plane is different by 1..2 mm on the 8 bolt AXS Dub vs old 8 Bolt Red BB30(386) cranks, which might or might not cause front shifting problems depending on frame and BB you have.